• V1 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • V2 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • Out of stock
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Satin Clamp w/V2 Lever & Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Temporarily postponed. Will have more info soon.

  • Out of stock
    New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt fully assembled and ready to display. Includes all the following:
    • GRAFLEX Clamp
    • V2 Lever
    • Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page
    All sections are Weathered or Stenciled by hand, and as such final product may vary slightly from images. Rust-oleum clear-coat (matte) applied to outer surface of Steel parts.

    Lead time : 2-3 weeks

  • Out of stock
    New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:
    • Clamp w/V2 Lever & V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Temporarily postponed. Will have more info soon.

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • Set includes one (1) Hot Tap & one (1) Cold Tap
    • 5-piece assembly per sink knob
    • Chrome finish
    • Square-punch in each cap same as Vintage
    • NO d-ring hole

    Lead time: 1-2 weeks

  • Out of stock
    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    ** Final product may differ slightly from image as these are hand-weathered. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

  • Out of stock

    Complete and functional Graflex Flashgun:

    This is an absolutely Beautiful, but somewhat imperfect Graflex Flashgun. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge under glass eye & red button
    • Shallow (but completely visible) lines on Graflex Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Red button & glass eye do not sit perfectly flush. Threading in flash was bored at a slight angle.
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Unit remains a working flashgun and does include working bulb assembly & battery spring (batteries not included). Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 1-2 weeks

  • Out of stock

    z Elite Inception – Retired

    $325.00
    • Chrome Balance Pipe
    • Chrome mid-Band
    • Chrome Activation Box
    • Chrome Sink Knob
    • Polished Brass & Copper Neck
    • Anodized Grenade & Booster w/semi-gloss coat
    • Two (2) Pommel Caps: Static & Sound Vents
    • NEW: this version will now come with it's own Blade Plug
    • NEW: this version will have an updated Activation Box
    • Final product will vary slightly from images shown. (New pics coming soon)
    *Hilt will have random blemishes including, but not limited to, dings, scuffs, pits, etc. Also, Covertec MAY not line up perfectly, but will be close.

    Inception & Inception Elite are now retired. Thanks to everyone that supported this project!!!