• Out of stock

    Complete and functional Graflex Flashgun:

    This is an absolutely Beautiful, but somewhat imperfect Graflex Flashgun. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge under glass eye & red button
    • Shallow (but completely visible) lines on Graflex Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Red button & glass eye do not sit perfectly flush. Threading in flash was bored at a slight angle.
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Unit remains a working flashgun and does include working bulb assembly & battery spring (batteries not included). Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 1-2 weeks

  • Out of stock

    No.3 MK1 – Black Oxide

    $159.99
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Wind-vane included.
    • Black Oxide finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
    • NEW!!! Weathered finish (NO RUST - New pics soon)

    Lead time approx. 2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • Set includes one (1) Hot Tap & one (1) Cold Tap
    • 5-piece assembly per sink knob
    • Chrome finish
    • Square-punch in each cap same as Vintage
    • NO d-ring hole

    Lead time: 1-2 weeks

  • Sale!
    Out of stock

    Gen.2 Graflex Flashgun*

    $200.00

    Complete and functional Graflex Flashgun (Gen.2) includes the following:

    • 1 Top shell w/working Bulb Assembly
    • 1 Bulb Clamp (bunny ears)
    • 1 Working Red button
    • 1 Working Glass eye for focusing
    • 1 Working Graflex clamp w/logo
    • 1 3-Cell Battery Can w/spring (batteries not included)

    *Our Gen.2 Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 2-3 weeks

  • MPP: Silver Sidebars

    $210.00

    Complete MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/SILVER sidebars
    • MPP Shroud w/Straight Knurl Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.

    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    Name Plate available: HERE

    Lead time: 1-2 weeks

  • MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/BLACK sidebars
    • MPP Shroud w/Diamond Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.

    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    Name Plate available: HERE

    Lead time: 1-2 weeks

     

  • Out of stock

    z Flashgun 5: “Battle Worn” Eco

    $245.00

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Working Graflex Clamp
    • NEW!!! Now featuring Gen.2 Red Buttons!!! (new pic coming soon)
    • Gen.1 Revised Grips (straight edge)
    • Accurate Slothfurnace OTIS Card
    • Accurate Kobold D-Ring (new pic coming soon)
    • Pommel stamping will be random
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Tentatively restocking August 2022

  • MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/silver bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips, D-Ring & Bubble Strip
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead time: 2-3 weeks

  • MPP w/BLACK bars on clamp, converted with Grips & D-Ring.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/BLACK bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail. V2 Board (not included) can be purchased directly from Slothfurnace HERE

    Lead time: 2-3 weeks

  • Out of stock

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • No-Logo Clamp
    • NEW!!! Now w/Gen.2 Red Button!!!
    • Glass Eye w/exposed Brass on side
    • Standard (long) Grips & Clamp Card
    • NEW!!! Now featuring WannaWanga's TFA Kobold
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Tentatively restocking August 2022

  • Out of stock
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectible for both WW1 collectors and sci-fi fans.
    • Breaks down in to individual parts
    • Machine finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2-3 weeks