• Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Weathered Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Steel construction - Black Oxide Finish
    • Hollow to better accommodate electronics
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
    • Windows allow for maximum space inside 'cage' design
    • Length (w/o threads) 1.75", Diameter 1.5"
    • Steel construction
  • FX Kit: Weathered

    $375.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • FX Steel V2 – Machine Finish

    $299.99
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Slothfurnace V2 Card
    • V2 Lever
    • Working Clamp w/Logo
    • Thumbscrew based on Vintage
    • Mystery Chunk based on Vintage
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • Out of stock

    FX Steel V2 – Stenciled Feb. Pre-Order

    $375.00
    New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt. Includes all the following:
    • Slothfurnace V2 Card
    • Working Clamp w/Logo
    • V2 Lever
    • Thumbscrew replicated from Vintage
    • Mystery Chunk Replicated from Vintage
    • V2 Blade Plug
    • more details @ bottom of page
    All sections are Weathered or Stenciled by hand, and as such final product may vary slightly from images. Rust-oleum clear-coat (matte) applied to outer surface of Steel parts. 

    Shipping approx. mid-late Feb. 2024

    Next Pre-Order March. 1, 2024

  • FX Steel V2 – Weathered

    $325.00
    New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:
    • New!!! V2 Slothfurnace Card
    • New!!! Thumbscrew based on Vintage
    • New!!! Mystery chunk based on Vintage
    • Clamp w/V2 Lever
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • Gen.1 Empty Top Shell (circa 2016)
    • Empty Top Shell
    • Brass construction w/brushed chrome plating
    • Includes Beer Tab & working Slide Switch
    • Perfect for Vader build or custom
    Note: threads for red button & glass eye are not 100% perpendicular to shell. Not an issue if using an inner FX blade holder. While this shell has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present. 

    Lead time approx. 1-2 weeks