- Clamp w/V2 Lever & V2 Card
- Thumbscrew
- Mystery chunk
- V2 Blade Plug
- more details @ bottom of page
Lead time approx. 2-3 weeks
-
New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt: -
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- Steel construction - Machine Finish
- Includes Lens-Housing Adapter for LED
- Works best w/LED that has hole in center of pad. e.g.. tri-cree
- Threads directly to our No.3 Mk1
- Compatible with a 1" thin-walled blade
- Blade retention screw included
Lead time 1-2 weeks
-
- 1 Pair/Set Transistors & Washers w/ME Logo & Print
- NEW! Stainless Steel
- M3.5 threading
Lead time approx.: 1-2 weeks
-
- Slotted down both sides to accept notches inside clamp.
- Threaded for two 6-32 and two M3.5 transistors (not included)
- 1.75" Length : 0.25" shorter than clamp to properly accept an MK1 grenade.
- Fits best on a 3/8" rod
- Aluminum - machine finish
-
Out of stock
MPP w/BLACK bars on clamp, converted with Grips & D-Ring.
MPP replica includes:
- Chrome tube/body
- Clamp w/BLACK bars
- Bulb release detail
- Accurate end-cap
- Newly re-designed Grips
- "Battle Worn": Minor nicks, dings, blemishes
Lead time: 2-3 weeks
-
Out of stock
Every single component in this Static Kit was created with actual in-hand authentic parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE*No other parts substitutions with weathered or black oxide finishes
Several parts were not made in machine finish as requested, so unfortunately, this version will not be available at least until Summer 2023. My apologies for any inconvenience.
-
- Replica Micro Precision Prod. name plate
- Vintage Finish (may have small blemishes - see pics)
Lead time approx.: 1-2 weeks
-
Out of stock
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- 1-piece balance pipe
- Steel construction
- Machine Finish
- 3/8-16 tap
Lead time 1-2 weeks
-
- Replicated from an original 1970's Starlite Plug & Ring
- ABS Mold Injection
- Should fit most Vintage Starlite sink knobs
*May require small shim for our older aluminum replicas
Lead time: 1-2 weeks
-
- Replicated from an original No.3 MK1 Rifle Grenade.
- Machined to exact measurements from Steel & Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
- NEW!!! Weathered finish (NO RUST - New pics soon)
Lead time approx. 2 weeks
-
- Aluminum Construction
- 1" slip-fit emitter shaft
- Anodized Pommel w/Sound Holes
- Main Body I.D. : 32mm
- Copper Heat-sink Included
Lead time : 1-2 weeks
-
- Replicated from an original Browning ANM2 machine gun booster
- Weathered Finish
- Steel construction
- Hollow w/0.955" I.D.
-
Out of stock
MPP End-cap features:
- Short Knurl
- Chrome Finish
- Black End-plug
Lead time 1-2 weeks
-
Out of stock
- Anodized & Machine Finish
- 1" slip-fit emitter shaft
- LED Momentary Switch
Lead time : 2-3 weeks
-
- Replicated from an original 1930's Graflex Flashgun Clamp
- Steel construction
- GRAFLEX logo on band
Lead time approx.: 1-2 weeks
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Steel construction - Black Oxide Finish
- Hollow to better accommodate electronics
-
- Aluminum LED Housing & Heat-sink
- M3 Blade retention screw (uses 1.5mm hex driver)
- Emitter Plug
- Copper Neck & Box details (clear-coat applied)
- Machine & Anodized finish
- Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
- 1" slip-fit emitter shaft
- Two (2) Pommel Caps: Static & Vented
- Weathered Finish
Lead time: 2-3 weeks
-
Out of stock
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- 1-piece balance pipe
- Steel construction
- Weathered Finish
- 3/8-16 tap
Lead time 1-2 weeks
-
Out of stock
- Replicated from an original No.3 MK1 Rifle Grenade.
- Machined to exact measurements from Steel & Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Wind-vane included.
- Black Oxide finish
- NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
Lead time approx. 2 weeks
-
- Replicated from an original 1970's Starlite Plug & Ring
- ABS Mold Injection
- Should fit most Vintage Starlite sink knobs
*May require small shim for our older aluminum replicas
Lead time: 1-2 weeks
-
- Replicated from an original Browning ANM2 machine gun booster
- Machine Finish
- Steel construction
- Hollow w/0.955" I.D.
-
- This option does NOT apply to Pre-Orders.
- This option will move your order to the "front of the line" and ship within 48 hours (not including holidays or weekends).
- Option is password protected as some items may are not possible to prep within 48 hours. EMAIL me for AVAILABLILITY and PASSWORD
This option is non-refundable
-
- Replicated from an original 1970's Starlite sink knob
- ABS Mold Injection and machined brass
- Set includes one (1) Hot Tap & one (1) Cold Tap
- 5-piece assembly per sink knob
- Chrome finish
- Square-punch in each cap same as Vintage
- NO d-ring hole
Lead time: 1-2 weeks
-
- Aluminum Construction
- 1" slip-fit emitter shaft
- Anodized Pommel w/Sound Holes
- Main Body I.D. : 32mm
- Copper Heat-sink Included
Lead time : 1-2 weeks
-
Out of stock
- Replicated from an original No.3 MK1 Windvane.
- Machined to exact measurements from Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
Lead time approx. 1-2 weeks
-
- Lettering replicated from an original No.3 MK1 Windvane Ring.
- Machined to exact measurements from Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Check bottom of page for fitting solutions.
Lead time approx. 1-2 weeks
-
- Lettering replicated from an original No.3 MK1 Windvane Ring.
- Machined to exact measurements from Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Check bottom of page for fitting solutions.
Lead time approx. 1-2 weeks
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Black Oxide Finish
- Steel construction
Out of Stock until Fall of 2020
-
- Replicated from an original 1970's Starlite Cube Section
- ABS Mold Injection
- Pre-drilled for 3/4" d-ring (included)
- Should fit most Vintage Starlite sink knobs
Lead time: 1-2 weeks
-
- Replicated from an original No.3 MK1 Rifle Grenade.
- Machined to exact measurements from Iron & Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Can be broken down as seen in last pic.
- Weathered finish w/RED Top Ring.
- NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
** Weathered & detailed by hand. Final product may vary slightly from images.
Lead time approx. 2-3 weeks
-
- Replicated from an original 1970's Starlite sink knob
- ABS Mold Injection and machined brass
- 5-piece assembly
- Chrome finish
- Threads on to a 3/8-16 rod
- D-ring included
Lead time: 1-2 weeks
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Weathered Finish
- Steel construction
Out of Stock until Fall of 2020
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Machine Finish
- Steel construction
Out of Stock until Fall of 2020
-
- Replicated from an original No.3 MK1 Windvane.
- Machined to exact measurements from Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
Lead time approx. 1-2 weeks
-
Out of stock
- Replicated from an original No.3 MK1 Rifle Grenade.
- Machined to exact measurements from Steel & Brass.
- This is a great collectible for both WW1 collectors and sci-fi fans.
- Breaks down in to individual parts
- Machine finish
- NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
Lead time approx. 2-3 weeks
-
Out of stock
Vintage 1930's 2-Cell Graflex Inc. w/Patent- Worn Condition
- See pics for best description
- Fully Vintage: owned prior to current replicas now available
- Replica 3-Cell Bottom available HERE
Lead time approximately 3-5 days