• Sale!

    Flashgun 5 “Battle Worn” PRO – Black Friday

    $293.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Graflex Clamp
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • Out of stock

    This is an absolutely Beautiful, but somewhat imperfect Flashgun Replica. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge around threading for glass eye & red button (eye & button NOT included)
    • Shallow (but completely visible) lines on Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Threading for red button & glass eye was bored at a slight angle. (This however, will not matter if using a blade holder)
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Again, please note this unit is an empty B Grade Flashgun w/no glass eye, red button, or bulb assembly. Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. Gen.2 Flashgun available HERE

    Lead time approx. 1-2  weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Machine Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Weathered Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Steel construction - Black Oxide Finish
    • Hollow to better accommodate electronics
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
    • Windows allow for maximum space inside 'cage' design
    • Length (w/o threads) 1.75", Diameter 1.5"
    • Steel construction
  • Sale!

    FX Kit: Weathered – Black Friday

    $329.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • Sale!

    FX Steel V2 – Machine Finish – Black Friday

    $270.00
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Satin Clamp w/V2 Lever & Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • Out of stock
    New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt. Includes all the following:
    • GRAFLEX Clamp
    • V2 Lever
    • Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page
    All sections are Weathered or Stenciled by hand, and as such final product may vary slightly from images. Rust-oleum clear-coat (matte) applied to outer surface of Steel parts. 

    LIMITED to Eight (8) this month

    Current Pre-Order: November -SOLD OUT

    ETA: Late November

    Next Pre-Order: Dec. 1st, 2022 12:00 a.m. MST

  • Sale!

    FX Steel V2 – Weathered – Black Friday

    $293.00
    New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:
    • Clamp w/V2 Lever & V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • Gen.2 Flashgun

    $210.00

    Complete and functional Flashgun (Gen.2) includes the following:

    • 1 Top shell w/working Bulb Assembly
    • 1 Bulb Clamp (bunny ears)
    • 1 Working Red button
    • 1 Working Glass eye for focusing
    • 1 Working Clamp w/logo
    • 1 3-Cell Battery Can w/spring (batteries not included)
    *Our Gen.2 Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and **While these units have a nice clean finish, it is NOT offered as flawless. Some imperfections may be present. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 2-3 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • Knurling sanded down to expose brass
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

    • Replicated from an original Graflex Folmer Eye
    • Made to exact measurements
    • Stainless Steel
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

    • Replicated from an original Graflex Red Button
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans
    • Working button
    *While this button has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1970's Starlite Plug & Ring
    • ABS Mold Injection
    • Should fit most Vintage Starlite sink knobs

    *May require small shim for our older aluminum replicas

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite Plug & Ring
    • ABS Mold Injection
    • Should fit most Vintage Starlite sink knobs

    *May require small shim for our older aluminum replicas

    Lead time: 1-2 weeks

    • 1 Pair/Set Transistors & Washers w/ME Logo & Print
    • NEW! Stainless Steel
    • M3.5 threading
    *Print is crisp & clear, but is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • Sale!

    MK1: Static – Weathered Kit- Black Friday

    $329.00
    Every single component in this Static Kit was created with actual in-hand Authentic Vintage parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Hilt can be broken down into individual pieces which are true replicas of their Vintage counterparts. Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead Time: approx. 2-3 weeks

  • Out of stock

    MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/silver bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips, D-Ring & Bubble Strip
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead time: 2-3 weeks