• FX Kit: Weathered

    $375.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • Gen.2 Flashgun

    $210.00

    Complete and functional Flashgun (Gen.2) includes the following:

    • 1 Top shell w/working Bulb Assembly
    • 1 Bulb Clamp (bunny ears)
    • 1 Working Red button
    • 1 Working Glass eye for focusing
    • 1 Working Clamp w/logo
    • 1 3-Cell Battery Can w/spring (batteries not included)
    NOTE: Our Gen.2 Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage. **While these units have a nice clean finish, it is NOT offered as flawless. Some imperfections may be present. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 2-3 weeks

  • D-Battery / 3-Cell Bottom

    $60.00
    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer New York" stamped on 3-cell bottom

    Lead time approx.: 1-2 weeks

    *While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

  • Out of stock

    z MJV2 – FX Ready : Empty Hilt

    $275.00
    • Anodized & Machine Finish
    • 1" slip-fit emitter shaft
    • LED Momentary Switch

    Lead time : 2-3 weeks

  • Out of stock

    No.3 MK1 – Black Oxide

    $159.99
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Wind-vane included.
    • Black Oxide finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2 weeks

  • Static – Clamp Spacer 3/8″ Bore

    $22.00
    • Slotted down both sides to accept notches inside clamp.
    • Threaded for two 6-32 and two M3.5 transistors (not included)
    • 1.75" Length : 0.25" shorter than clamp to properly accept an MK1 grenade.
    • Fits best on a 3/8" rod
    • Aluminum - machine finish
  • Out of stock

    ANM2 Booster – Black Oxide

    $65.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Black Oxide Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Elite Inception – FX Ready

    $325.00
    FX Ready - Empty Hilt
    • Chrome Balance Pipe, Mid-section, and Sink Knob
    • Brass Neck coated w/Brass & Copper Paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug
    *While this hilt has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx. 2-3 weeks..

  • Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • NEW!!! RAF Code  114A/63 on side-bar
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • MPP: Silver Sidebars

    $228.00

    Complete MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/SILVER sidebars
    • MPP Shroud w/Straight Knurl Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.
    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page. Name Plate available: HERE

    Lead  Time approx. 2-3 weeks

  • V1 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • V2 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks