• A Thermal Detonator: Clean

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

  • A Thermal Detonator: Weathered

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
    • Replicated from an original 1970's Starlite Cube Section
    • ABS Mold Injection
    • Pre-drilled for d-ring (included)
    • Should fit most Vintage Starlite sink knobs

    Lead time: 1-2 weeks

  • Out of stock

    ANM2 Booster – Black Oxide

    $65.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Black Oxide Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction

    Out of Stock until Fall of 2020

    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

    • Hollow CNC Precision Machined MPP Tube
    • Iron Construction
    • Polished & Chrome Plated
    • Detailed Port Lettering

    **While this chrome barrel will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    Lead time: 1-2 weeks

  • 1" Blade Plug

    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center
  • Out of stock
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectible for both WW1 collectors and sci-fi fans.
    • Breaks down in to individual parts
    • Machine finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2-3 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Iron & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Can be broken down as seen in last pic.
    • Weathered finish w/RED Top Ring.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    ** Weathered & detailed by hand. Final product may vary slightly from images.

    Lead time approx. 2-3 weeks

    • Replica Micro Precision Prod. name plate
    • Vintage Finish (may have small blemishes - see pics)
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.

    Lead time 1 week

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • NO LOGO on band
    • Bright satin finish

    Lead time: 1 week

     

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • Steel construction
    • GRAFLEX logo on band

    Lead time 1 week

    • Drilled to match V3 version
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish
    **While this clamp has a nice clean finish, it is NOT offered as flawless. V3 holes were drilled post-clamp-production, so small imperfections may be present.

    Lead time: 1-2 weeks

    • NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
    • for ANH Graflex or MPP
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  •  

    • NEW!!! Pre-Notched Poly-carbonate Grips w/adhesive back
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

    • This 3-Cell Bottom comes with grips & d-ring attached
    • Correct Angled Grips, D-Ring w/Double-rivet D-ring & Bubbles
    • "Folmer New York" stamped on 3-cell bottom
    • Also includes 7-bubble strip

    Lead time : 1-2 weeks

    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer NewYork" stamped on 3-cell bottom

    Lead time: 1-2 weeks

    **While this battery can has a nice clean finish, it is NOT offered as flawless. Tiny imperfections may still be present.

    • Steel Weathered Mk1 Balance Pipe
    • Real Brass & Copper Neck
    • Anodized Aluminum Grenade & Booster
    • Aluminum mid-Band
    • Aluminum Activation Box
    • Aluminum Sink Knob
    *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #2

    This is a PRE-ORDER item. Please order SEPERATELY from In-Stock items.

    Wave 2 will likely NOT ship prior to May 27th. Should ship, but NOT guaranteed by mid-late June 2022.

    Pre-order ONLY if you can stick to your commitment.

  • Out of stock

    Flashgun 4: “Battle Worn” Pro

    $265.00

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time currently 2-3 weeks

  • Flashgun 5 “Battle Worn” PRO

    $325.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Graflex Clamp
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time currently 2-3 weeks

    • This option will move your order to the "front of the line" and ship within 48 hours (not including holidays or weekends).
    • Option is password protected as some items may are not possible to prep within 48 hours. EMAIL me for AVAILABLILITY and PASSWORD

    This option is non-refundable

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Machine Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Weathered Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Steel construction - Black Oxide Finish
    • Hollow to better accommodate electronics
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
    • Windows allow for maximum space inside 'cage' design
    • Length (w/o threads) 1.75", Diameter 1.5"
    • Steel construction
  • Out of stock

    FX – Machine Finish Kit

    $310.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    *No other parts substitutions with weathered or black oxide finishes.

    Lead time approx. 2-3 weeks

  • FX: Weathered Kit

    $349.99
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • Sale!
    Out of stock

    Gen.2 Graflex Flashgun*

    $200.00

    Complete and functional Graflex Flashgun (Gen.2) includes the following:

    • 1 Top shell w/working Bulb Assembly
    • 1 Bulb Clamp (bunny ears)
    • 1 Working Red button
    • 1 Working Glass eye for focusing
    • 1 Working Graflex clamp w/logo
    • 1 3-Cell Battery Can w/spring (batteries not included)

    *Our Gen.2 Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 2-3 weeks