• A Thermal Detonator: Clean

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

  • A Thermal Detonator: Weathered

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
    • Replicated from an original 1970's Starlite Cube Section
    • ABS Mold Injection
    • Pre-drilled for d-ring (included)
    • Should fit most Vintage Starlite sink knobs

    Lead time: 1-2 weeks

  • Out of stock

    ANM2 Booster – Black Oxide

    $65.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Black Oxide Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction

    Out of Stock until Fall of 2020

    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

    • Hollow CNC Precision Machined MPP Tube
    • Iron Construction
    • Polished & Chrome Plated
    • Detailed Port Lettering

    **While this chrome barrel will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    Lead time: 1-2 weeks

  • 1" Blade Plug

    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center
  • Out of stock
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectible for both WW1 collectors and sci-fi fans.
    • Breaks down in to individual parts
    • Machine finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2-3 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Iron & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Can be broken down as seen in last pic.
    • Weathered finish w/RED Top Ring.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    ** Weathered & detailed by hand. Final product may vary slightly from images.

    Lead time approx. 2-3 weeks

    • Replica Micro Precision Prod. name plate
    • Vintage Finish (may have small blemishes - see pics)
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.

    Lead time 1 week

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • NO LOGO on band
    • Bright satin finish

    Lead time: 1 week

     

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • Steel construction
    • GRAFLEX logo on band

    Lead time 1 week

    • Drilled to match V3 version
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish
    **While this clamp has a nice clean finish, it is NOT offered as flawless. V3 holes were drilled post-clamp-production, so small imperfections may be present.

    Lead time: 1-2 weeks

    • NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
    • for ANH Graflex or MPP
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  •  

    • NEW!!! Pre-Notched Poly-carbonate Grips w/adhesive back
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

    • This 3-Cell Bottom comes with grips & d-ring attached
    • Correct Angled Grips, D-Ring w/Double-rivet D-ring & Bubbles
    • "Folmer New York" stamped on 3-cell bottom
    • Also includes 7-bubble strip

    Lead time : 1-2 weeks

    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer NewYork" stamped on 3-cell bottom

    Lead time: 1-2 weeks

    **While this battery can has a nice clean finish, it is NOT offered as flawless. Tiny imperfections may still be present.

    • Steel Weathered Mk1 Balance Pipe
    • Real Brass & Copper Neck
    • Anodized Aluminum Grenade & Booster
    • Aluminum mid-Band
    • Aluminum Activation Box
    • Aluminum Sink Knob
    *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #2

    This is a PRE-ORDER item. Please order SEPERATELY from In-Stock items.

    Wave 2 will likely NOT ship prior to May 27th. Should ship, but NOT guaranteed by mid-late June 2022.

    Pre-order ONLY if you can stick to your commitment.

  • Out of stock

    Flashgun 4: “Battle Worn” Pro

    $265.00

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time currently 2-3 weeks

  • Flashgun 5 “Battle Worn” PRO

    $325.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Graflex Clamp
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time currently 2-3 weeks