• Introducing our newest flashgun...the TELEGRAPH working flash!!! Not only is this a working flashgun it is the world's first and only TELEGRAPH flashgun in production capable of working as a real flash on a Vintage Graflex camera! Flashgun includes the following:

      • 1 Chrome plated Brass Top shell w/working Bulb Assembly
      • 1 Working Bulb Clamp (bunny ears)
      • 1 Working Spring-lever Red button
      • 1 Working FOLMER Eye for focusing
      • 1 Working Clamp w/FOLMER Lever
      • 1 3-Cell Battery Can w/spring (batteries not included)
    NOTE: Our TELEGRAPH Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a Vintage. **While these units have a nice clean finish, it is NOT offered as flawless. Some imperfections may be present. Any imperfections will only add to the character & authenticity of the unit. 

    Please order separately from In Stock items.

    Pre-order pushed to late-January.

    NOTE: late January is only the estimate for project completion. This does not include possible delays, packaging & shipping. Updates will be available via my FB page.

    UPDATE Feb. 05, 2024: So the project is coming along and nearly complete. We're up against the CNY, so that will add a coupe weeks delay bringing the project completion near the end of this month. Updates can be found on my FB page HERE.

  • Micro Precision Prod. Bar & Lever Set
    • Replicated from genuine MPP specs
    • Straight Edge Aluminum Bars (machine finish)
    • Chrome plated Lever & Washer
    *While this bar & lever set has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • Micro Precision Prod. Bar & Lever Set
    • Replicated from genuine MPP specs
    • Trapezoid Black Bars
    • Chrome plated Lever & Washer
    *While this bar & lever set has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • Cone Adapter Kit

    $46.00$68.00
    Cone Adapter Kit for Vintage Obi-Wan ANH Parts or Mk1 Kit:
    • Double-sided Cone Adapter (Flat & Cone)
    • 12" Steel Carriage Bolt 5/16-18
    • Two (2) rubber O-rings for proper pressure fit
    • Rubber Spacer to protect your vintage AS Tap/Handwheel
    • Optional Clamp Spacer

    Lead time approx.: 1-2 weeks

  • Gen.2 - Non-Working Bulb Assembly
    • Replicated from a Genuine MPP Flashgun outer specs
    • Includes all port contacts
    • Includes circular inner spring & bulb contact plate (no spring action)
    • Includes two (2) mounting screws
    While Created for our replica MPP these MAY fit other replicas w/some modification if any. Please let us know how these fit with Genuine King Sols or Heilands.

    Lead time approx.: 1-2 weeks

  • Gen.1 Empty Top Shell (circa 2016)
    • Empty Top Shell
    • Brass construction w/brushed chrome plating
    • Includes Beer Tab & working Slide Switch
    • Perfect for Vader build or custom
    Note: threads for red button & glass eye are not 100% perpendicular to shell. Not an issue if using an inner FX blade holder. While this shell has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present. 

    Lead time approx. 1-2 weeks

  • Working Bulb Assembly
    • Replicated from a Genuine 1930's/40's Graflex Flashgun
    • Works & functions same as a Vintage Bulb Assembly
    • 3-piece mold-injection assembly
    • Includes six (6) brass pins
    • Includes mini-bulb

    Lead time approx.: 1-2 weeks

  • Working Bulb Clamp (aka: Bunny Ears)
    • Steel chrome plated construction
    • Functional Bulb Clamp
    • Includes threaded sleeve & smooth-head screw
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • 1" Blade Plug
    • Will fit Inception or any other 1" diameter blade socket
    • Aluminum construction

    Lead time approx.: 1-2 weeks

    • One (1) Sidebar w/RAF code
    • Replicated from an Original Graflex Clamp Sidebar
    • Made to exact measurements
    • Threaded same as a Vintage
    • Includes RAF code: 114A/63
    • This is a great collectible for both Camera Collectors and sci-fi fans.
    *While this sidebar has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • MK1: Static – Weathered Kit

    $385.00
    Every single component in this Static Kit was created with actual in-hand Authentic Vintage parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Hilt can be broken down into individual pieces which are true replicas of their Vintage counterparts. Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead Time: approx. 2-3 weeks

  • Folmer S.S. Lever

    $26.00$29.99
    • S.S. (Stainless Steel) construction
    • Black Oxide Pin
    • Threaded same as a Vintage lever
    • One (1) Lever
    • Optional S.S. Square Washer

    Lead time approx.: 1-2 weeks

  • Gen.1 & 2 Bulb Release
    • Replica Micro Precision Prod. Bulb Release
    • 2-piece Release Knob w/press fit post
    • Working Button w/Spring

    Lead time approx.: 1-2 weeks

  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • 2-piece Balance Pipe
    • One (1) Cone Adapter
    • Steel construction
    • Machine Finish

    Restocking late-June 2023

  • Out of stock
    Vintage 1930's 2-Cell Graflex Inc. w/Patent
    • No Glass Eye or Red Button
    • Worn Condition
    • See pics for best description
    • Fully Vintage: owned prior to current replicas now available
    • Replica 3-Cell Bottom available HERE
    • Replica Red Button available HERE
    • Replica Glass Eye available HERE
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Lead time approximately 3-5 days

  • Out of stock
    Vintage 1930's 3-Cell Graflex Inc. w/Patent
    • Good-Fair Condition
    • See pics for best description (Note: Red button is slightly off center, see last pic)
    • Fully Vintage: owned prior to current replicas now available
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Lead time approximately 3-5 days

  • Out of stock
    Vintage 1930's 2-Cell Graflex Inc. w/Patent
    • Worn Condition
    • See pics for best description
    • Fully Vintage: owned prior to current replicas now available
    • Replica 3-Cell Bottom available HERE
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Lead time approximately 3-5 days

  • Out of stock
    Vintage 1930's 3-Cell Graflex Inc. w/Patent
    • Good-Fair Condition
    • See pics for best description
    • Fully Vintage: owned prior to current replicas now available
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Lead time approximately 3-5 days

  • Out of stock
    Vintage 1930's 3-Cell Graflex Inc. w/Patent
    • Good-Fair Condition
    • See pics for best description
    • Fully Vintage: owned prior to current replicas now available
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Lead time approximately 3-5 days

  • Out of stock
    Vintage 1930's 3-Cell Graflex Inc. w/Patent
    • Good Condition
    • See pics for best description
    • Fully Vintage: owned prior to current replicas now available
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Lead time approximately 3-5 days

  • Out of stock
    Vintage Real Parts Obi-Wan Hilt includes:
    • Vintage Real: No.3 Mk1 British Rifle Grenade (Inert)
    • Vintage Real: Graflex Clamp
    • Vintage Real: Exactra Calculator Bubble Strip
    • Vintage Real: Marconi Elliot Transistors
    • Vintage Real: Aircraft Steel Washers
    • Vintage Real: Armitage Shanks Cold Tap w/Black Ring (Replica Blue Ring also included)
    • Vintage Real: D-Ring from Bell & Howell Camera Case
     
    • Weathered Replica: Rolls Royce Derwent Balance Pipe
    • Weathered Replica: Browning ANM2 Machine Gun Booster
    *International Orders will ship via FedEx only and be marked at FULL value & insured. Please keep this in mind for any custom fees/VAT taxes which are the responsibility of the customer.

    Will ship within 48hrs of ordering, not including weekends or holidays

  • Buried Hope – Weathered: WAVE #7

    $325.00
    Buried Hope - FX Ready Empty Hilt
    • Steel Weathered Mk1 Balance Pipe
    • Brass & Copper chemically Weathered Neck
    • Anodized Aluminum Grenade & Booster
    • I.D. (inner diameter) is minimum of 25mm
    • 1″ slip-fit emitter shaft
    • Includes both a Static & FX Cap
    • More info @ bottom of page
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #7

    Lead time approx.: 2-3 weeks

    • 1 Pair/Set Transistors & Washers w/ME Logo & Print
    • NEW! Stainless Steel
    • M3.5 threading
    *Print is crisp & clear, but is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks