• Out of stock
    Every single component in this Static Kit was created with actual in-hand authentic parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time 2-3 weeks

    *No other parts substitutions with weathered or black oxide finishes

    • Replicated from an original Graflex Red Button
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans
    • Working button

    Lead time: 1-2 weeks

    **While this button is nicely chromed, it is NOT offered as flawless. Tiny imperfections may still be present.

    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer NewYork" stamped on 3-cell bottom

    Lead time: 1-2 weeks

    **While this battery can has a nice clean finish, it is NOT offered as flawless. Tiny imperfections may still be present.

  • Out of stock
    • 1 Pair/Set Transistors & Washers
    • Aluminum
    • NEW! 6-32 threading
    • Machine Finish
    NEW! 6-32 threading will fit right into your clamp with no filing needed!
  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • 1-piece balance pipe
    • Steel construction
    • Machine Finish
    • 3/8-16 tap

    Lead time 1-2 weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Weathered Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Machine Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Iron & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Can be broken down as seen in last pic.
    • Weathered finish w/RED Top Ring.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    ** Weathered & detailed by hand. Final product may vary slightly from images.

    Lead time approx. 2-3 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
    • NEW!!! Weathered finish (NO RUST - New pics soon)

    Lead time approx. 2 weeks

  • Out of stock
    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

    • Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
    • Windows allow for maximum space inside 'cage' design
    • Length (w/o threads) 1.75", Diameter 1.5"
    • Steel construction
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.

    Lead time 1 week

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • Steel construction
    • GRAFLEX logo on band

    Lead time 1 week

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction

    Out of Stock until Fall of 2020

    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction
    • Hollow w/0.955" I.D.
  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction

    Out of Stock until Fall of 2020

    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction
    • Hollow w/0.955" I.D.
  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Steel construction - Black Oxide Finish
    • Hollow to better accommodate electronics
    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads on to a 3/8-16 rod
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

  • MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/BLACK sidebars
    • MPP Shroud w/Diamond Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.

    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    Name Plate available: HERE

    Lead time: 1-2 weeks

     

    • This 3-Cell Bottom comes with grips & d-ring attached
    • Correct Angled Grips, D-Ring w/Double-rivet D-ring & Bubbles
    • "Folmer New York" stamped on 3-cell bottom
    • Also includes 7-bubble strip

    Lead time : 1-2 weeks

    • NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
    • for ANH Graflex or MPP
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  • Out of stock

    MPP Shroud features:

    • Straight Knurl Thumbscrew
    • D-Ring

    Discontinued (at least through Fall 2022)

  • Out of stock

    MPP Shroud features:

    • Diamond Knurl Thumbscrew
    • D-Ring

    ** Thumbscrew knurling will vary from image shown.

    Discontinued (at least through Fall 2022)

    • Drilled to match V3 version
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish
    **While this clamp has a nice clean finish, it is NOT offered as flawless. V3 holes were drilled post-clamp-production, so small imperfections may be present.

    Lead time: 1-2 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time: 1-2 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • Knurling sanded down to expose brass
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time: 1-2 weeks

  •  

    • NEW!!! Pre-Notched Poly-carbonate Grips w/adhesive back
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • NO LOGO on band
    • Bright satin finish

    Lead time: 1 week

     

    • UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
    • This option will upgrade your MK1 Sink Knob to Chrome w/HOT plug & ring
    • Apply this option to any finish, FX or Static version

    Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE

  • 1" Blade Plug

    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center
  • Out of stock
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectible for both WW1 collectors and sci-fi fans.
    • Breaks down in to individual parts
    • Machine finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2-3 weeks

    • Replica Micro Precision Prod. name plate
    • Vintage Finish (may have small blemishes - see pics)
    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads on to a 3/8-16 rod
    • D-ring included

    Lead time: 1-2 weeks