• A Detonator: Weathered

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
  • A Thermal Detonator: Clean

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    • Replicated from an original 1970's Starlite Cube Section
    • ABS Mold Injection
    • Pre-drilled for 3/4" d-ring (included)
    • Should fit most Vintage Starlite sink knobs

    Lead time: 1-2 weeks

  • Out of stock

    ANM2 Booster – Black Oxide

    $65.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Black Oxide Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction

    Out of Stock until Fall of 2020

    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

  • Out of stock
    • Hollow CNC Precision Machined MPP Tube
    • Iron Construction
    • Polished & Chrome Plated
    • Detailed Port Lettering

    *While this chrome barrel has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    **NOTE: Inventory is getting low, so blemishes will be more common (blemishes should be perfect for weathered project!!)

    Lead time: 1-2 weeks

  • 1" Blade Plug
    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center

    Lead time approx.: 1-2 weeks

  • Out of stock
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectible for both WW1 collectors and sci-fi fans.
    • Breaks down in to individual parts
    • Machine finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2-3 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Iron & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Can be broken down as seen in last pic.
    • Weathered finish w/RED Top Ring.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    ** Weathered & detailed by hand. Final product may vary slightly from images.

    Lead time approx. 2-3 weeks

  • Buried Hope – Weathered: WAVE #6

    $325.00
    Buried Hope - FX Ready Empty Hilt
    • Steel Weathered Mk1 Balance Pipe
    • Brass Weathered Neck (Copper section painted/weathered)
    • Anodized Aluminum Grenade & Booster
    • 1″ slip-fit emitter shaft
    • Includes both a Static & FX Cap
    • More info @ bottom of page
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #6

    Lead time approx.: 2-3 weeks

    • Replica Micro Precision Prod. name plate
    • Vintage Finish (may have small blemishes - see pics)

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • NO LOGO on band
    • Bright satin finish
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • Steel construction
    • GRAFLEX logo on band
    *While this clamp has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Drilled to match V3 version
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish
    *While this clamp has a nice clean finish, it is NOT offered as flawless. V3 holes were drilled post-clamp production, so some imperfections may be present.

    Lead time approx.: 1-2 weeks

    • NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
    • for ANH Graflex or MPP
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  •  

    • NEW!!! Pre-Notched Poly-carbonate Grips w/adhesive back
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  • Out of stock
    • This 3-Cell Bottom comes with grips & d-ring attached
    • Correct Angled Grips, D-Ring w/Double-rivet D-ring & Bubbles
    • "Folmer New York" stamped on 3-cell bottom
    • Also includes 7-bubble strip

    Lead time : 1-2 weeks

    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer New York" stamped on 3-cell bottom

    Lead time approx.: 1-2 weeks

    *While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

  • Elite Inception – FX Ready

    $325.00
    FX Ready - Empty Hilt
    • Chrome Balance Pipe, Mid-section, and Sink Knob
    • Brass Neck coated w/Brass & Copper Paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug
    *While this hilt is clean & unweathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time approx. 2-3 weeks..

  • Flashgun 4: “Battle Worn” Pro

    $289.99

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • Flashgun 5 “Battle Worn” PRO

    $325.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Graflex Clamp
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • Out of stock

    This is an absolutely Beautiful, but somewhat imperfect Flashgun Replica. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge around threading for glass eye & red button (eye & button NOT included)
    • Shallow (but completely visible) lines on Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Threading for red button & glass eye was bored at a slight angle. (This however, will not matter if using a blade holder)
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Again, please note this unit is an empty B Grade Flashgun w/no glass eye, red button, or bulb assembly. Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. Gen.2 Flashgun available HERE

    Lead time approx. 1-2  weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Machine Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Weathered Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Steel construction - Black Oxide Finish
    • Hollow to better accommodate electronics
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction
    • Hollow w/0.955" I.D.
    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads directly to our (or real) booster
    • Hollow cap w/plug for easy battery or SD card access
    • D-ring included

    Lead time: 1-2 weeks

    • Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
    • Windows allow for maximum space inside 'cage' design
    • Length (w/o threads) 1.75", Diameter 1.5"
    • Steel construction
  • FX Kit: Weathered

    $365.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • FX Steel V2 – Machine Finish

    $299.99
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Satin Clamp w/V2 Lever & Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks