• FX Kit: Weathered

    $385.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • Out of stock

    Gen.2 Flashgun

    $210.00

    Complete and functional Flashgun (Gen.2) includes the following:

    • 1 Top shell w/working Bulb Assembly
    • 1 Bulb Clamp (bunny ears)
    • 1 Working Red button
    • 1 Working Glass eye for focusing
    • 1 Working Clamp w/logo
    • 1 3-Cell Battery Can w/spring (batteries not included)
    NOTE: Our Gen.2 Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage. **While these units have a nice clean finish, it is NOT offered as flawless. Some imperfections may be present. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 2-3 weeks

  • D-Battery / 3-Cell Bottom

    $60.00
    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer New York" stamped on 3-cell bottom

    Lead time approx.: 1-2 weeks

    *While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

  • Out of stock

    z MJV2 – FX Ready : Empty Hilt

    $275.00
    • Anodized & Machine Finish
    • 1" slip-fit emitter shaft
    • LED Momentary Switch

    Lead time : 2-3 weeks

  • Out of stock

    No.3 MK1 – Black Oxide

    $159.99
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Wind-vane included.
    • Black Oxide finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2 weeks

  • Static – Clamp Spacer 3/8″ Bore

    $22.00
    • Slotted down both sides to accept notches inside clamp.
    • Threaded for two 6-32 and two M3.5 transistors (not included)
    • 1.75" Length : 0.25" shorter than clamp to properly accept an MK1 grenade.
    • Fits best on a 3/8" rod
    • Aluminum - machine finish
  • ANM2 Booster – Black Oxide

    $70.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Mild* Black Oxide Finish
    • Steel construction
    NOTE: Black Oxide Finish is not dark. It's closer to a gun metal gray.

    Lead time approx. 1 weeks

  • Sale!

    Elite Inception – FX Ready – MAY 4TH!!!

    Original price was: $325.00.Current price is: $244.00.
    FX Ready - Empty Hilt
    • Chrome Balance Pipe, Mid-section, and Sink Knob
    • Brass Neck coated w/Brass & Copper Paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug
    • Minimum I.D. of 25mm
    *While this hilt has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx. 2-3 weeks..

  • Out of stock

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • NEW!!! RAF Code  114A/63 on side-bar
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • MPP: Silver Sidebars

    $228.00

    Complete MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/SILVER sidebars
    • MPP Shroud w/Straight Knurl Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.
    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page. Name Plate available: HERE

    Lead  Time approx. 2-3 weeks

  • Out of stock

    V1 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • Out of stock

    V2 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • Out of stock

    Flashgun 8: “Battle Worn”

    $289.99

    Working Gen.2 Flashgun includes:

    • Top & Bottom Shell
    • No-Logo Clamp
    • Working Gen.2 Red Button
    • Glass Eye w/exposed Brass on side
    • Grips & Clamp Card
    • Kobold D-ring
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead Time approx. 2-3 weeks

  • Sale!

    MPP 4 (V1): S.S. Converted & “Battle Worn” Gen.3 – MAY 4TH!!!

    Original price was: $275.00.Current price is: $206.00.

    MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.

    MPP replica includes:

    • NEW!!!  Shroud w/Vintage accurate paint
    • NEW!!!  Brass Chrome Plated Body
    • NEW!!!  Straight Edge Aluminum Bars
    • NEW!!!  Bulb-Release w/threaded knob & working button
    • Short Knurl End-Cap
    • Newly re-designed Grips, D-Ring & Bubble Strip
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead  Time approx. 2-3 weeks

  • Sale!

    Balance V4: FX READY – MAY 4TH!!!

    Original price was: $269.99.Current price is: $203.00.
    FX Ready Empty Hilt
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

  • Converted 3-Cell Bottom #8

    $110.00
    • This 3-Cell Bottom comes with grips & d-ring attached.
    • Correct alignment of grips for proper placement on your top-shell.
    • "Folmer New York" version 3-cell bottom.
    • Includes translucent/gold card.

    Lead time approx. 1 week

  • Out of stock

    V2 – FX Steel V2 – Machine Finish

    $299.99
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Slothfurnace V2 Card
    • V2 Lever
    • Working Clamp w/Logo
    • Thumbscrew based on Vintage
    • Mystery Chunk based on Vintage
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • Out of stock

    V2 – FX Steel V2 – Weathered

    $325.00
    New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:
    • New!!! V2 Slothfurnace Card
    • New!!! Thumbscrew based on Vintage
    • New!!! Mystery chunk based on Vintage
    • Clamp w/V2 Lever
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • A Thermal Detonator: Clean

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

  • Graflex Folmer Eye

    $28.00
    • Replicated from an original Graflex Folmer Eye
    • Made to exact measurements
    • Stainless Steel
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

  • Out of stock

    Flashgun 5 “Battle Worn” PRO

    $325.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Clamp w/Logo
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • Out of stock
    New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt. Includes all the following:
    • Slothfurnace V2 Card
    • Working Clamp w/Logo
    • V2 Lever
    • Thumbscrew replicated from Vintage
    • Mystery Chunk Replicated from Vintage
    • V2 Blade Plug
    • more details @ bottom of page
    All sections are Weathered or Stenciled by hand, and as such final product may vary slightly from images. Rust-oleum clear-coat (matte) applied to outer surface of Steel parts. 

    Next Pre-Order TBD - possibly May 2024

  • Sale!

    MPP 4 (V2): B.B. Converted & “Battle Worn” Gen.3 – MAY 4TH!!!

    Original price was: $275.00.Current price is: $206.00.

    MPP w/BLACK bars on clamp, converted with Grips & D-Ring.

    MPP replica includes:

    • NEW!!!  Shroud w/Vintage accurate paint
    • NEW!!!  Brass Chrome Plated Body
    • NEW!!!  Bulb-Release w/threaded knob & working button
    • Clamp w/Black Trapezoidal Bars
    • Short Knurl End-Cap
    • Newly re-designed Grips
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail. V2 Board (not included) can be purchased directly from Slothfurnace HERE

    Lead  Time approx. 2-3 weeks

  • Sale!

    Buried Hope – Weathered: WAVE #7 – MAY 4TH!!!

    Original price was: $325.00.Current price is: $244.00.
    Buried Hope - FX Ready Empty Hilt
    • Steel Weathered Mk1 Balance Pipe
    • Brass & Copper chemically Weathered Neck
    • Anodized Aluminum Grenade & Booster
    • I.D. (inner diameter) is minimum of 25mm
    • 1″ slip-fit emitter shaft
    • Includes both a Static & FX Cap
    • More info @ bottom of page
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #7

    Lead time approx.: 2-3 weeks

  • MK1: Static – Weathered Kit

    $385.00
    Every single component in this Static Kit was created with actual in-hand Authentic Vintage parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Hilt can be broken down into individual pieces which are true replicas of their Vintage counterparts. Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead Time: approx. 2-3 weeks

  • Sale!

    An Elite “Auction Lot” Variant – MAY 4TH!!!

    Original price was: $325.00.Current price is: $244.00.
    FX Ready - Empty Hilt: With several 'auction lot' variants gaining more & more popularity... this was bound to come to fruition!! Our own take on the 'auction lot' variant consisting of the following:
    • Brass Neck painted with several layers of textured & brown coats
    • Chemically Blackened Copper Neck
    • Machine Finish "Battle Worn" Emitter
    • Anodized Grenade & Booster sections
    • Chrome Mid-section, and Sink Knob
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug
    • Inner Diameter: minimum of 25mm
    NOTE: While this hilt has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx. 1-2 weeks..

  • A Detonator: Weathered

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
    • Replicated from an original Graflex Red Button
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans
    • Working button
    *While this button has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • 1-piece balance pipe
    • Steel construction
    • Machine Finish
    • 3/8-16 tap

    Lead time 1-2 weeks

    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Weathered Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • Steel construction - Machine Finish
    • Includes Lens-Housing Adapter for LED
    • Works best w/LED that has hole in center of pad. e.g.. tri-cree
    • Threads directly to our No.3 Mk1
    • Compatible with a 1" thin-walled blade
    • Blade retention screw included

    Lead time 1-2 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Iron & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Can be broken down as seen in last pic.
    • Weathered finish w/RED Top Ring.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    ** Weathered & detailed by hand. Final product may vary slightly from images.

    Lead time approx. 2-3 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
    • NEW!!! Weathered finish (NO RUST - New pics soon)

    Lead time approx. 2 weeks

  • Out of stock
    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

    • Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
    • Windows allow for maximum space inside 'cage' design
    • Length (w/o threads) 1.75", Diameter 1.5"
    • Steel construction
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks