- UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
- This option will upgrade your MK1 Sink Knob to Chrome w/HOT plug & ring
- Apply this option to any finish, FX or Static version
Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE
- Sorry, this product cannot be purchased.
-
-
- UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
- This option will upgrade your MK1 Sink Knob to Chrome w/COLD plug & ring
- Apply this option to any finish, FX or Static version
Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE
-
1" Blade Plug- Will fit Mk1 or any other 1" diameter blade socket
- Shine-through bore in center
Lead time approx.: 1-2 weeks
-
- Replica Micro Precision Prod. name plate
- Vintage Finish (may have small blemishes - see pics)
Lead time approx.: 1-2 weeks
-
- Slotted down both sides to accept notches inside clamp.
- Threaded for two 6-32 and two M3.5 transistors (not included)
- 1.75" Length : 0.25" shorter than clamp to properly accept an MK1 grenade.
- Fits best on a 3/8" rod
- Aluminum - machine finish
-
- Replicated from an original Graflex Glass Eye
- Made to exact measurements
- This is a great collectible for both Camera Collectors and sci-fi fans
Lead time approx.: 1-2 weeks
-
- Replicated from an original Graflex Red Button
- Made to exact measurements
- This is a great collectible for both Camera Collectors and sci-fi fans
- Working button
Lead time approx.: 1-2 weeks
-
Out of stock
MPP End-cap features:
- Short Knurl
- Chrome Finish
- Black End-plug
Lead time 1-2 weeks
-
- This option does NOT apply to Pre-Orders.
- This option will move your order to the "front of the line" and ship within 48 hours (not including holidays or weekends).
- Option is password protected as some items may are not possible to prep within 48 hours. EMAIL me for AVAILABLILITY and PASSWORD
This option is non-refundable
-
- Replicated from an original Graflex Folmer Eye
- Made to exact measurements
- Stainless Steel
- This is a great collectible for both Camera Collectors and sci-fi fans
Lead time approx.: 1-2 weeks
-
- Lettering replicated from an original No.3 MK1 Windvane Ring.
- Machined to exact measurements from Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Check bottom of page for fitting solutions.
Lead time approx. 1-2 weeks
-
- Replicated from an original Graflex Glass Eye
- Made to exact measurements
- Knurling sanded down to expose brass
- This is a great collectible for both Camera Collectors and sci-fi fans
Lead time approx.: 1-2 weeks
-
- Lettering replicated from an original No.3 MK1 Windvane Ring.
- Machined to exact measurements from Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Check bottom of page for fitting solutions.
Lead time approx. 1-2 weeks
-
- 1 Pair/Set Transistors & Washers w/ME Logo & Print
- NEW! Stainless Steel
- M3.5 threading
Lead time approx.: 1-2 weeks
-
- Replicated from an original 1970's Starlite Plug & Ring
- ABS Mold Injection
- Should fit most Vintage Starlite sink knobs
*May require small shim for our older aluminum replicas
Lead time: 1-2 weeks
-
- Replicated from an original 1970's Starlite Plug & Ring
- ABS Mold Injection
- Should fit most Vintage Starlite sink knobs
*May require small shim for our older aluminum replicas
Lead time: 1-2 weeks
-
- 7 NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
- for ANH Graflex or MPP
- 92mm in length
- 3M double-stick tape
Lead time: 1-2 weeks
-
- Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
- Windows allow for maximum space inside 'cage' design
- Length (w/o threads) 1.75", Diameter 1.5"
- Steel construction
-
- 6 NEW!!! Pre-Notched Poly-carbonate Grips w/adhesive back
- 92mm in length
- 3M double-stick tape
Lead time: 1-2 weeks
-
- Replicated from an original 1930's Graflex Clamp.
- Made to exact measurements.
- GRAFLEX logo on band.
- Bright satin finish.
Lead time approx.: 1-2 weeks
-
- Replicated from an original 1930's Graflex Flashgun Clamp
- NO LOGO on band
- Bright satin finish
Lead time approx.: 1-2 weeks
-
- Replicated from an original 1970's Starlite Cube Section
- ABS Mold Injection
- Pre-drilled for 3/4" d-ring (included)
- Should fit most Vintage Starlite sink knobs
Lead time: 1-2 weeks
-
- Drilled to match V3 version
- Replicated from an original 1930's Graflex Clamp.
- Made to exact measurements.
- GRAFLEX logo on band.
- Bright satin finish
Lead time approx.: 1-2 weeks
-
- Replicated from an original Graflex 3-Cell battery holder.
- "Folmer New York" stamped on 3-cell bottom
Lead time approx.: 1-2 weeks
*While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Machine Finish
- Steel construction
Out of Stock until Fall of 2020
-
- Replicated from an original Browning ANM2 machine gun booster
- Machine Finish
- Steel construction
- Hollow w/0.955" I.D.
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Weathered Finish
- Steel construction
Out of Stock until Fall of 2020
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Black Oxide Finish
- Steel construction
Out of Stock until Fall of 2020
-
Out of stock
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- 1-piece balance pipe
- Steel construction
- Machine Finish
- 3/8-16 tap
Lead time 1-2 weeks
-
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- Steel construction - Machine Finish
- Includes Lens-Housing Adapter for LED
- Works best w/LED that has hole in center of pad. e.g.. tri-cree
- Threads directly to our No.3 Mk1
- Compatible with a 1" thin-walled blade
- Blade retention screw included
Lead time 1-2 weeks
-
Out of stock
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- 1-piece balance pipe
- Steel construction
- Weathered Finish
- 3/8-16 tap
Lead time 1-2 weeks
-
- Replicated from an original Browning ANM2 machine gun booster
- Weathered Finish
- Steel construction
- Hollow w/0.955" I.D.
-
Out of stock
- Replicated from an original Browning ANM2 machine gun booster
- Steel construction - Black Oxide Finish
- Hollow to better accommodate electronics
-
- Replicated from an original 1930's Graflex Flashgun Clamp
- Steel construction
- GRAFLEX logo on band
Lead time approx.: 1-2 weeks
-
- Replicated from an original Rolls Royce Derwent engine Balance Pipe
- Steel construction - Weathered Finish
- Includes Lens-Housing Adapter for LED
- Works best w/LED that has hole in center of pad. e.g.. tri-cree
- Threads directly to our No.3 Mk1
- Compatible with a 1" thin-walled blade
- Blade retention screw included
Lead time 1-2 weeks
-
- Replicated from an original 1970's Starlite sink knob
- ABS Mold Injection and machined brass
- 5-piece assembly
- Chrome finish
- Threads directly to our (or real) booster
- Hollow cap w/plug for easy battery or SD card access
- D-ring included
Lead time: 1-2 weeks