Lead time approx. 3 weeks
- Sorry, this product cannot be purchased.
-
Sale!
Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE -
Sale!
Working Gen.2 Flashgun replica includes:
- Top & Bottom Shell
- Graflex Clamp w/Calc Bubbles
- NEW!!! RAF Code 114A/63 on side-bar
- Gen. 2 Red Button
- NEW Folmer Eye
- NEW Double-rivet D-Ring
- NEW Angled Grips
- "Battle Worn": random nicks, dings, blemishes
Lead-time approx. 2-3 weeks
-
- Replicated from an original 1930's Graflex Clamp.
- Made to exact measurements.
- GRAFLEX logo on band.
- Bright satin finish.
Lead time approx.: 1-2 weeks
-
1" Blade Plug- Will fit Mk1 or any other 1" diameter blade socket
- Shine-through bore in center
Lead time approx.: 1-2 weeks
-
- UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
- This option will upgrade your MK1 Sink Knob to Chrome w/COLD plug & ring
- Apply this option to any finish, FX or Static version
Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE
-
Sale!
FX Ready - Empty Hilt- Chrome Balance Pipe, Mid-section, and Sink Knob
- Brass Neck coated w/Brass & Copper Paint
- Anodized Grenade & Booster
- Two (2) Pommel Caps: Static & Sound Vents
- Blade Plug
Lead time approx. 2-3 weeks..
-
MPP Flashgun Replica includes:
- Chrome MPP Tube / Handle
- MPP clamp w/BLACK sidebars
- MPP Shroud w/Diamond Thumbscrew
- Endcap w/3 stamped lines
- Features large "B" Port, and is a non-working unit.
***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.
Name Plate available: HERE
Lead Time approx. 2-3 weeks
-
- Replicated from an original Graflex Red Button
- Made to exact measurements
- This is a great collectible for both Camera Collectors and sci-fi fans
- Working button
Lead time approx.: 1-2 weeks
-
Complete and functional Flashgun (Gen.2) includes the following:
- 1 Top shell w/working Bulb Assembly
- 1 Bulb Clamp (bunny ears)
- 1 Working Red button
- 1 Working Glass eye for focusing
- 1 Working Clamp w/logo
- 1 3-Cell Battery Can w/spring (batteries not included)
Lead time: 2-3 weeks
-
Complete MPP Flashgun Replica includes:
- Chrome MPP Tube / Handle
- MPP clamp w/SILVER sidebars
- MPP Shroud w/Straight Knurl Thumbscrew
- Endcap w/3 stamped lines
- Features large "B" Port, and is a non-working unit.
Lead Time approx. 2-3 weeks
-
Sale!
MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.
MPP replica includes:
- NEW!!! Shroud w/Vintage accurate paint
- NEW!!! Brass Chrome Plated Body
- NEW!!! Straight Edge Aluminum Bars
- NEW!!! Bulb-Release w/threaded knob & working button
- Short Knurl End-Cap
- Newly re-designed Grips, D-Ring & Bubble Strip
- "Battle Worn": Minor nicks, dings, blemishes
Lead Time approx. 2-3 weeks
-
Sale!
Working Gen.2 Flashgun includes:
- Top & Bottom Shell
- No-Logo Clamp
- Working Gen.2 Red Button
- Glass Eye w/exposed Brass on side
- Grips & Clamp Card
- Kobold D-ring
- "Battle Worn": Minor nicks, dings, blemishes
Lead Time approx. 2-3 weeks
-
Sale!
- Aluminum LED Housing & Heat-sink
- M3 Blade retention screw (uses 1.5mm hex driver)
- Emitter Plug
- Copper Neck & Box details (clear-coat applied)
- Machine & Anodized finish
- Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
- 1" slip-fit emitter shaft
- Two (2) Pommel Caps: Static & Vented
Lead time: 2-3 weeks
-
Sale!
Buried Hope - FX Ready Empty Hilt- Steel Weathered Mk1 Balance Pipe
- Brass & Copper chemically Weathered Neck
- Anodized Aluminum Grenade & Booster
- I.D. (inner diameter) is minimum of 25mm
- 1″ slip-fit emitter shaft
- Includes both a Static & FX Cap
- More info @ bottom of page
WAVE #7
Lead time approx.: 2-3 weeks
-
- Replicated from an original Graflex Glass Eye
- Made to exact measurements
- Knurling sanded down to expose brass
- This is a great collectible for both Camera Collectors and sci-fi fans
Lead time approx.: 1-2 weeks
-
- Replicated from an original Graflex 3-Cell battery holder.
- "Folmer New York" stamped on 3-cell bottom
Lead time approx.: 1-2 weeks
*While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.
-
Sale!
Thermal Detonator - Fully assembled- Die-cast Zinc
- Heavy @ approx. 9 0z.
- Chrome plated
- Functional Sound & Lights
- 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
Lead time: 1-2 weeks
PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.
-
Sale!
Thermal Detonator - Fully assembled- Die-cast Zinc
- Heavy @ approx. 9 0z.
- Chrome plated / Clean finish
- Functional Sound & Lights
- 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
Lead time: 1-2 weeks
**While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.
-
Sale!
Working Gen.2 Flashgun replica includes:- Top & Bottom Shell
- Working Clamp w/Logo
- Accurate Slothfurnace OTIS card
- Accurate Kobold
- Two (2) Gen. 2 red buttons
- NEW accurate grips
- NEW pan-head (Exactra sized) Phillips screws
- NEW 0.5" chrome tape on clamp
- NEW removal of Beer Tab
- Cave stamping alignment
- “Battle Worn”: random nicks, dings, blemishes
Lead-time approx. 2-3 weeks
-
Out of stock
MPP Clamp features:
- Black Sidebars
- Working Lever
- Clamp Sleeve
Lead Time approx. 1-2 weeks
-
- 7 NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
- for ANH Graflex or MPP
- 92mm in length
- 3M double-stick tape
Lead time: 1-2 weeks
-
Out of stock
Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE*No other parts substitutions with weathered or black oxide finishes.
Several parts were not made in machine finish as requested, so unfortunately, this version will not be available at least until Summer 2023. My apologies for any inconvenience.
-
Out of stock
New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt. Includes all the following:- Slothfurnace V2 Card
- Working Clamp w/Logo
- V2 Lever
- Thumbscrew replicated from Vintage
- Mystery Chunk Replicated from Vintage
- V2 Blade Plug
- more details @ bottom of page
Shipping approx. Dec. 10th, 2023
Next Pre-Order Jan. 1, 2024
-
- Replicated from an original Graflex Folmer Eye
- Made to exact measurements
- Stainless Steel
- This is a great collectible for both Camera Collectors and sci-fi fans
Lead time approx.: 1-2 weeks
-
- UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
- This option will upgrade your MK1 Sink Knob to Chrome w/HOT plug & ring
- Apply this option to any finish, FX or Static version
Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE
-
Sale!
New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:- Slothfurnace V2 Card
- V2 Lever
- Working Clamp w/Logo
- Thumbscrew based on Vintage
- Mystery Chunk based on Vintage
- V2 Blade Plug
- more details @ bottom of page
Lead time approx. 2-3 weeks
-
- Replicated from an original 1930's Graflex Flashgun Clamp
- NO LOGO on band
- Bright satin finish
Lead time approx.: 1-2 weeks
-
V2 Mystery Chunk- One (1) piece
- Accurate top knurl
- Steel construction
- 8-32 1/4" threading
Lead time approx. 1-2 weeks
-
- Drilled to match V3 version
- Replicated from an original 1930's Graflex Clamp.
- Made to exact measurements.
- GRAFLEX logo on band.
- Bright satin finish
Lead time approx.: 1-2 weeks
-
- Replicated from an original Graflex Glass Eye
- Made to exact measurements
- This is a great collectible for both Camera Collectors and sci-fi fans
Lead time approx.: 1-2 weeks
-
Sale!
MPP w/BLACK bars on clamp, converted with Grips & D-Ring.
MPP replica includes:
- NEW!!! Shroud w/Vintage accurate paint
- NEW!!! Brass Chrome Plated Body
- NEW!!! Bulb-Release w/threaded knob & working button
- Clamp w/Black Trapezoidal Bars
- Short Knurl End-Cap
- Newly re-designed Grips
- "Battle Worn": Minor nicks, dings, blemishes
Lead Time approx. 2-3 weeks
-
- 1 Pair/Set Transistors & Washers w/ME Logo & Print
- NEW! Stainless Steel
- M3.5 threading
Lead time approx.: 1-2 weeks
-
- Hollow CNC Precision Machined MPP Tube
- Gen.2 - Iron Construction
- Polished & Chrome Plated
- Detailed Port Lettering
*While this chrome barrel has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.
Lead Time approx. 1-2 weeks
-
- Threaded at both ends to connect our Mk1 and Booster together. Also threads authentic parts together.
- Windows allow for maximum space inside 'cage' design
- Length (w/o threads) 1.75", Diameter 1.5"
- Steel construction
-
Sale!
New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:- New!!! V2 Slothfurnace Card
- New!!! Thumbscrew based on Vintage
- New!!! Mystery chunk based on Vintage
- Clamp w/V2 Lever
- V2 Blade Plug
- more details @ bottom of page
Lead time approx. 2-3 weeks
-
- Replicated from an original 1970's Starlite sink knob
- ABS Mold Injection and machined brass
- 5-piece assembly
- Chrome finish
- Threads on to a 3/8-16 rod
- D-ring included
Lead time: 1-2 weeks