• Sale!

    FX Kit: Weathered – Black Friday

    $329.00
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Hilts can be broken down into individual pieces which are true replicas of their Vintage counterparts. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead time approx. 3 weeks

  • Sale!

    Flashgun 4: “Battle Worn” Pro- Black Friday

    $261.00

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • 1" Blade Plug
    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center

    Lead time approx.: 1-2 weeks

    • UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
    • This option will upgrade your MK1 Sink Knob to Chrome w/COLD plug & ring
    • Apply this option to any finish, FX or Static version

    Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE

  • Sale!

    Elite Inception – FX Ready – Black Friday

    $293.00
    FX Ready - Empty Hilt
    • Chrome Balance Pipe, Mid-section, and Sink Knob
    • Brass Neck coated w/Brass & Copper Paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug
    *While this hilt is clean & unweathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time approx. 2-3 weeks..

  • Out of stock

    MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/BLACK sidebars
    • MPP Shroud w/Diamond Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.

    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    Name Plate available: HERE

    Lead time: 1-2 weeks

     

    • Replicated from an original Graflex Red Button
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans
    • Working button
    *While this button has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • Gen.2 Flashgun

    $210.00

    Complete and functional Flashgun (Gen.2) includes the following:

    • 1 Top shell w/working Bulb Assembly
    • 1 Bulb Clamp (bunny ears)
    • 1 Working Red button
    • 1 Working Glass eye for focusing
    • 1 Working Clamp w/logo
    • 1 3-Cell Battery Can w/spring (batteries not included)
    *Our Gen.2 Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and **While these units have a nice clean finish, it is NOT offered as flawless. Some imperfections may be present. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 2-3 weeks

  • Sale!

    MK1: Static – Weathered Kit- Black Friday

    $329.00
    Every single component in this Static Kit was created with actual in-hand Authentic Vintage parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Hilt can be broken down into individual pieces which are true replicas of their Vintage counterparts. Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    Lead Time: approx. 2-3 weeks

  • Out of stock

    MPP: Silver Sidebars

    $210.00

    Complete MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/SILVER sidebars
    • MPP Shroud w/Straight Knurl Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.
    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page. Name Plate available: HERE

    Lead time: 1-2 weeks

  • Out of stock

    MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/silver bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips, D-Ring & Bubble Strip
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead time: 2-3 weeks

  • Sale!

    Balance V4: FX READY EMPTY HILT – Black Friday

    $243.00
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

  • Sale!

    Buried Hope – Weathered: WAVE #6 Black Friday

    $293.00
    Buried Hope - FX Ready Empty Hilt
    • Steel Weathered Mk1 Balance Pipe
    • Brass Weathered Neck (Copper section painted/weathered)
    • Anodized Aluminum Grenade & Booster
    • 1″ slip-fit emitter shaft
    • Includes both a Static & FX Cap
    • More info @ bottom of page
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #6

    Lead time approx.: 2-3 weeks

    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer New York" stamped on 3-cell bottom

    Lead time approx.: 1-2 weeks

    *While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

  • Out of stock
    • This 3-Cell Bottom comes with grips & d-ring attached
    • Correct Angled Grips, D-Ring w/Double-rivet D-ring & Bubbles
    • "Folmer New York" stamped on 3-cell bottom
    • Also includes 7-bubble strip

    Lead time : 1-2 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • Knurling sanded down to expose brass
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

  • Sale!

    A Detonator: Weathered – Black Friday

    $261.00
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
  • Sale!

    A Thermal Detonator: Clean – Black Friday

    $261.00
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    • NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
    • for ANH Graflex or MPP
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  • Out of stock
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    *No other parts substitutions with weathered or black oxide finishes.

    Several parts were not made in machine finish as requested, so unfortunately, this version will not be available at least until Summer 2023. My apologies for any inconvenience.

  • Sale!

    Flashgun 5 “Battle Worn” PRO – Black Friday

    $293.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Graflex Clamp
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

    • UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
    • This option will upgrade your MK1 Sink Knob to Chrome w/HOT plug & ring
    • Apply this option to any finish, FX or Static version

    Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE

    • Replicated from an original Graflex Folmer Eye
    • Made to exact measurements
    • Stainless Steel
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks