Products Archive - Roman Props

Sorry, this product cannot be purchased.

114A/63 RAF Sidebar

$29.99
- One (1) Sidebar w/RAF code
- Replicated from an Original Graflex Clamp Sidebar
- Made to exact measurements
- Threaded same as a Vintage
- Includes RAF code: 114A/63
- This is a great collectible for both Camera Collectors and sci-fi fans.
*While this sidebar has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.
Lead time approx.: 1-2 weeks
Add to cart Details
A Detonator: Weathered

Rated 4.67 out of 5
$289.99
Thermal Detonator - Fully assembled
- Die-cast Zinc
- Heavy @ approx. 9 0z.
- Chrome plated
- Functional Sound & Lights
- 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
*CLEAN version can be found HERE
Lead time: 1-2 weeks

PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.
Add to cart Details
A Thermal Detonator: Clean

Rated 5.00 out of 5
$289.99
Thermal Detonator - Fully assembled
- Die-cast Zinc
- Heavy @ approx. 9 0z.
- Chrome plated / Clean finish
- Functional Sound & Lights
- 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
Lead time: 1-2 weeks

**While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.
Add to cart Details
A.S. Cube Section

$49.99
- Replicated from an original 1970's Starlite Cube Section
- ABS Mold Injection
- Pre-drilled for 3/4" d-ring (included)
- Should fit most Vintage Starlite sink knobs
Lead time: 1-2 weeks
Add to cart Details
Out of stock

ANM2 Booster – Black Oxide

Rated 5.00 out of 5
$65.00
- Replicated from an original Browning ANM2 machine gun booster
- Black Oxide Finish
- Steel construction
Out of Stock until Fall of 2020
Details
Out of stock

ANM2 Booster – Machine Finish

$60.00
- Replicated from an original Browning ANM2 machine gun booster
- Machine Finish
- Steel construction
Out of Stock until Fall of 2020
Details
Out of stock

ANM2 Booster – Weathered

$65.00
- Replicated from an original Browning ANM2 machine gun booster
- Weathered Finish
- Steel construction
Out of Stock until Fall of 2020
Details
Bal V4: Weathered – FX Ready

$289.99
- Aluminum LED Housing & Heat-sink
- M3 Blade retention screw (uses 1.5mm hex driver)
- Emitter Plug
- Copper Neck & Box details (clear-coat applied)
- Machine & Anodized finish
- Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
- 1" slip-fit emitter shaft
- Two (2) Pommel Caps: Static & Vented
- Weathered Finish
*All sections are Weathered by hand, and as such, final product may vary slightly from images.
Lead time: 2-3 weeks
Add to cart Details
Balance V4: FX READY EMPTY HILT

Rated 5.00 out of 5
$269.99
- Aluminum LED Housing & Heat-sink
- M3 Blade retention screw (uses 1.5mm hex driver)
- Emitter Plug
- Copper Neck & Box details (clear-coat applied)
- Machine & Anodized finish
- Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
- 1" slip-fit emitter shaft
- Two (2) Pommel Caps: Static & Vented
*While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.
Lead time: 2-3 weeks
Add to cart Details
Barrel (MPP) for Webley Blaster

$99.99
- Hollow CNC Precision Machined MPP Tube
- Iron Construction
- Polished & Chrome Plated
- Detailed Port Lettering
*While this chrome barrel has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

Lead Time approx. 1-2 weeks
Add to cart Details
Blade Plug 1″ B-V4

$15.00
1" Blade Plug
- Will fit Balance V4 or any other 1" diameter blade socket
- Aluminum construction
Lead time approx.: 1-2 weeks
Add to cart Details
Blade Plug 1″ Inception

$15.00
1" Blade Plug
- Will fit Inception or any other 1" diameter blade socket
- Aluminum construction
Lead time approx.: 1-2 weeks
Add to cart Details
Blade Plug 1″ Mk1

$15.00
1" Blade Plug
- Will fit Mk1 or any other 1" diameter blade socket
- Shine-through bore in center
Lead time approx.: 1-2 weeks
Add to cart Details
Blade Plug 1″ V2

$20.00
V2 Blade Plug
- Aluminum construction
- Will fit V2 or any other 1" diameter blade socket
- Shine-through bore in center
- Includes Steel Pin w/4-40 set-screw
Add to cart Details
Out of stock

British Rifle Grenade: Machine Finish

$249.00
- Replicated from an original No.3 MK1 Rifle Grenade.
- Machined to exact measurements from Steel & Brass.
- This is a great collectible for both WW1 collectors and sci-fi fans.
- Breaks down in to individual parts
- Machine finish
- NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
Lead time approx. 2-3 weeks
Details
British Rifle Grenade: Weathered

$269.99
- Replicated from an original No.3 MK1 Rifle Grenade.
- Machined to exact measurements from Iron & Brass.
- This is a great collectable for both WW1 collectors and sci-fi fans.
- Can be broken down as seen in last pic.
- Weathered finish w/RED Top Ring.
- NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
** Weathered & detailed by hand. Final product may vary slightly from images.
Lead time approx. 2-3 weeks
Add to cart Details
Bulb Assembly Graflex

$65.00
Working Bulb Assembly
- Replicated from a Genuine 1930's/40's Graflex Flashgun
- Works & functions same as a Vintage Bulb Assembly
- 3-piece mold-injection assembly
- Includes six (6) brass pins
- Includes mini-bulb
Lead time approx.: 1-2 weeks
Add to cart Details
Bulb Assembly MPP

$45.00
Non-Working Bulb Assembly
- Replicated from a Genuine MPP Flashgun outer specs
- Includes all port contacts
- Includes circular inner spring & bulb contact plate (no spring action)
- Includes two (2) mounting screws
While Created for our replica MPP these MAY fit other replicas w/some modification if any. Please let us know how these fit with Genuine King Sols or Heilands.
Lead time approx.: 1-2 weeks
Add to cart Details
Bulb Clamp (Bunny Ears)

$38.00
Working Bulb Clamp (aka: Bunny Ears)
- Steel chrome plated construction
- Functional Bulb Clamp
- Includes threaded sleeve & smooth-head screw
*While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.
Lead time approx.: 1-2 weeks
Add to cart Details
Bulb Release MPP

$29.99
- Replica Micro Precision Prod. Bulb Release
- Working Button w/Spring
Lead time approx.: 1-2 weeks
Add to cart Details
Buried Hope – Weathered: WAVE #7

Rated 5.00 out of 5
$325.00
Buried Hope - FX Ready Empty Hilt
- Steel Weathered Mk1 Balance Pipe
- Brass & Copper chemically Weathered Neck
- Anodized Aluminum Grenade & Booster
- I.D. (inner diameter) is minimum of 25mm
- 1″ slip-fit emitter shaft
- Includes both a Static & FX Cap
- More info @ bottom of page
Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.
WAVE #7

Lead time approx.: 2-3 weeks
Add to cart Details
CLAMP : Bright Satin

$45.00
- Replicated from an original 1930's Graflex Clamp.
- Made to exact measurements.
- GRAFLEX logo on band.
- Bright satin finish.
*While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.
Lead time approx.: 1-2 weeks
Add to cart Details
CLAMP : BRIGHT SATIN NO-LOGO

$45.00
- Replicated from an original 1930's Graflex Flashgun Clamp
- NO LOGO on band
- Bright satin finish
*While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.
Lead time approx.: 1-2 weeks
Add to cart Details
CLAMP : CHROME

$70.00
- Replicated from an original 1930's Graflex Flashgun Clamp
- Steel construction
- GRAFLEX logo on band
*While this clamp has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present.
Lead time approx.: 1-2 weeks
Add to cart Details