• Out of stock

    This is an absolutely Beautiful, but somewhat imperfect Flashgun Replica. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge around threading for glass eye & red button (eye & button NOT included)
    • Shallow (but completely visible) lines on Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Threading for red button & glass eye was bored at a slight angle. (This however, will not matter if using a blade holder)
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Again, please note this unit is an empty B Grade Flashgun w/no glass eye, red button, or bulb assembly. Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. Gen.2 Flashgun available HERE

    Lead time approx. 1-2  weeks

  • Sale!

    Buried Hope – Weathered: WAVE #6 Black Friday

    $293.00
    Buried Hope - FX Ready Empty Hilt
    • Steel Weathered Mk1 Balance Pipe
    • Brass Weathered Neck (Copper section painted/weathered)
    • Anodized Aluminum Grenade & Booster
    • 1″ slip-fit emitter shaft
    • Includes both a Static & FX Cap
    • More info @ bottom of page
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #6

    Lead time approx.: 2-3 weeks

    • 1 Pair/Set Transistors & Washers w/ME Logo & Print
    • NEW! Stainless Steel
    • M3.5 threading
    *Print is crisp & clear, but is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. ** Final product may differ slightly from image as these are hand-weathered. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

    • Replicated from an original 1970's Starlite Cube Section
    • ABS Mold Injection
    • Pre-drilled for 3/4" d-ring (included)
    • Should fit most Vintage Starlite sink knobs

    Lead time: 1-2 weeks

  • Sale!
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Out of stock

    MPP End-cap features:

    • Short Knurl
    • Chrome Finish
    • Black End-plug
    * Threaded to fit real MPP. ** So far these do fit Heilands & King Sols

    Lead time 1-2 weeks

  • Out of stock

    MPP w/BLACK bars on clamp, converted with Grips & D-Ring.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/BLACK bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail. V2 Board (not included) can be purchased directly from Slothfurnace HERE

    Lead time: 2-3 weeks

  • Out of stock
    • Hollow CNC Precision Machined MPP Tube
    • Iron Construction
    • Polished & Chrome Plated
    • Detailed Port Lettering

    *While this chrome barrel has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    **NOTE: Inventory is getting low, so blemishes will be more common (blemishes should be perfect for weathered project!!)

    Lead time: 1-2 weeks

  • Out of stock
    New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt. Includes all the following:
    • GRAFLEX Clamp
    • V2 Lever
    • Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page
    All sections are Weathered or Stenciled by hand, and as such final product may vary slightly from images. Rust-oleum clear-coat (matte) applied to outer surface of Steel parts. 

    LIMITED to Eight (8) this month

    Current Pre-Order: November -SOLD OUT

    ETA: Late November

    Next Pre-Order: Dec. 1st, 2022 12:00 a.m. MST

  • Sale!

    Flashgun 5 “Battle Worn” PRO – Black Friday

    $293.00
    Working Gen.2 Flashgun replica includes:
    • Top & Bottom Shell
    • Working Graflex Clamp
    • Accurate Slothfurnace OTIS card
    • Accurate Kobold
    • Two (2) Gen. 2 red buttons
    • NEW accurate grips
    • NEW pan-head (Exactra sized) Phillips screws
    • NEW 0.5" chrome tape on clamp
    • NEW removal of Beer Tab
    • Cave stamping alignment
    • “Battle Worn”: random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time approx. 2-3 weeks

  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • 1-piece balance pipe
    • Steel construction
    • Weathered Finish
    • 3/8-16 tap

    Lead time 1-2 weeks

    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

    • Replicated from an original Graflex Folmer Eye
    • Made to exact measurements
    • Stainless Steel
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

    • This option does NOT apply to Pre-Orders.
    • This option will move your order to the "front of the line" and ship within 48 hours (not including holidays or weekends).
    • Option is password protected as some items may are not possible to prep within 48 hours. EMAIL me for AVAILABLILITY and PASSWORD

    This option is non-refundable

  • Sale!

    A Thermal Detonator: Clean – Black Friday

    $261.00
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

  • Sale!

    A Detonator: Weathered – Black Friday

    $261.00
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
  • Sale!

    FX Steel V2 – Weathered – Black Friday

    $293.00
    New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:
    • Clamp w/V2 Lever & V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

  • Sale!

    FX Steel V2 – Machine Finish – Black Friday

    $270.00
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Satin Clamp w/V2 Lever & Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Lead time approx. 2-3 weeks

    • Replicated from an original 1970's Starlite Plug & Ring
    • ABS Mold Injection
    • Should fit most Vintage Starlite sink knobs

    *May require small shim for our older aluminum replicas

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite Plug & Ring
    • ABS Mold Injection
    • Should fit most Vintage Starlite sink knobs

    *May require small shim for our older aluminum replicas

    Lead time: 1-2 weeks

    • UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
    • This option will upgrade your MK1 Sink Knob to Chrome w/COLD plug & ring
    • Apply this option to any finish, FX or Static version

    Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • Set includes one (1) Hot Tap & one (1) Cold Tap
    • 5-piece assembly per sink knob
    • Chrome finish
    • Square-punch in each cap same as Vintage
    • NO d-ring hole

    Lead time: 1-2 weeks