• Out of stock
    Every single component in this Static Kit was created with actual in-hand authentic parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    *No other parts substitutions with weathered or black oxide finishes

    Several parts were not made in machine finish as requested, so unfortunately, this version will not be available at least until Summer 2023. My apologies for any inconvenience.

  • Out of stock

    z MJV2 – FX Ready : Empty Hilt

    $275.00
    • Anodized & Machine Finish
    • 1" slip-fit emitter shaft
    • LED Momentary Switch

    Lead time : 2-3 weeks

  • Out of stock
    Accuracy is taken to the next level with our FX Kit!! The FX kit is essentially a Static Kit on steroids!! We utilize each part's already existing threads for assembly, then swap out the solid spacer for a hollow cage. We increase the Booster I.D. to a maximum of 0.955", and finally top everything off with our custom LED Housing & Heat-sink. All outer dimensions remain the same as the Static Kits. A twist here, a twist there, an boom!! The most accurate, thin-necked, 1" blade compatible, FX-ready kit in the known universe!!! Upgrades remain true to the authentic parts. No compromises have been made outwardly. Only the smallest 4-40 retention screw has been added for blade safety. Blade Plug (not included) available: HERE Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE

    *No other parts substitutions with weathered or black oxide finishes.

    Several parts were not made in machine finish as requested, so unfortunately, this version will not be available at least until Summer 2023. My apologies for any inconvenience.

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. ** Final product may differ slightly from image as these are hand-weathered. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

  • Out of stock
    • Replicated from an original No.3 MK1 Windvane.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    ** NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • Set includes one (1) Hot Tap & one (1) Cold Tap
    • 5-piece assembly per sink knob
    • Chrome finish
    • Square-punch in each cap same as Vintage
    • NO d-ring hole

    Lead time: 1-2 weeks

  • V2 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • V1 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

    • UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
    • This option will upgrade your MK1 Sink Knob to Chrome w/HOT plug & ring
    • Apply this option to any finish, FX or Static version

    Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE

    • UPGRADE ONLY - NOT FOR INDIVIDUAL SALE
    • This option will upgrade your MK1 Sink Knob to Chrome w/COLD plug & ring
    • Apply this option to any finish, FX or Static version

    Additional Sink Knobs and/or Plugs w/Rings may be purchased: HERE

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads on to a 3/8-16 rod
    • D-ring included

    Lead time: 1-2 weeks

    • Replicated from an original 1970's Starlite sink knob
    • ABS Mold Injection and machined brass
    • 5-piece assembly
    • Chrome finish
    • Threads on to a 3/8-16 rod
    • D-ring included

    Lead time: 1-2 weeks

  • Static – Clamp Spacer

    $20.00
    • Slotted down both sides to accept notches inside clamp.
    • Threaded for two 6-32 and two M3.5 transistors (not included)
    • 1.75" Length : 0.25" shorter than clamp to properly accept an MK1 grenade.
    • Fits best on a 3/8" rod
    • Aluminum - machine finish
  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • 1-piece balance pipe
    • Steel construction
    • Weathered Finish
    • 3/8-16 tap

    Lead time 1-2 weeks

  • Out of stock
    • Replicated from an original Rolls Royce Derwent engine Balance Pipe
    • 1-piece balance pipe
    • Steel construction
    • Machine Finish
    • 3/8-16 tap

    Lead time 1-2 weeks

    • This option does NOT apply to Pre-Orders.
    • This option will move your order to the "front of the line" and ship within 48 hours (not including holidays or weekends).
    • Option is password protected as some items may are not possible to prep within 48 hours. EMAIL me for AVAILABLILITY and PASSWORD

    This option is non-refundable

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)
    • NEW!!! Weathered finish (NO RUST - New pics soon)

    Lead time approx. 2 weeks

  • Out of stock

    No.3 MK1 – Black Oxide

    $159.99
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Wind-vane included.
    • Black Oxide finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2 weeks

  • Out of stock

    MPP: Silver Sidebars

    $210.00

    Complete MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/SILVER sidebars
    • MPP Shroud w/Straight Knurl Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.
    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page. Name Plate available: HERE

    Lead time: 1-2 weeks

  • Out of stock

    MPP Flashgun Replica includes:

    • Chrome MPP Tube / Handle
    • MPP clamp w/BLACK sidebars
    • MPP Shroud w/Diamond Thumbscrew
    • Endcap w/3 stamped lines
    • Features large "B" Port, and is a non-working unit.

    ***While this MPP unit will be clean & un-weathered, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    Name Plate available: HERE

    Lead time: 1-2 weeks

     

  • Out of stock

    MPP End-cap features:

    • Short Knurl
    • Chrome Finish
    • Black End-plug
    * Threaded to fit real MPP. ** So far these do fit Heilands & King Sols

    Lead time 1-2 weeks

  • Out of stock

    MPP w/BLACK bars on clamp, converted with Grips & D-Ring.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/BLACK bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail. V2 Board (not included) can be purchased directly from Slothfurnace HERE

    Lead time: 2-3 weeks