• A Thermal Detonator: Clean

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    • Replicated from an original 1970's Starlite Cube Section
    • ABS Mold Injection
    • Pre-drilled for 3/4" d-ring (included)
    • Should fit most Vintage Starlite sink knobs

    Lead time: 1-2 weeks

  • Out of stock

    ANM2 Booster – Black Oxide

    $65.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Black Oxide Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • B+ Elite Inception – Mild Blems*

    $325.00
    • Chrome Balance Pipe
    • Chrome mid-Band
    • Chrome Activation Box
    • Chrome Sink Knob
    • Brass Neck coated w/Brass & Copper Paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug

    *New-Old stock emitters were located, and do have mild blemishes (nicks, dings, etc.) So while the overall hilt is in excellent condition, it will still NOT be offered as flawless. Some imperfections may still be present throughout.

    Lead time approx. 2-3 weeks..

  • This is an absolutely Beautiful, but somewhat imperfect Flashgun Replica. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge around threading for glass eye & red button (eye & button NOT included)
    • Shallow (but completely visible) lines on Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Threading for red button & glass eye was bored at a slight angle. (This however, will not matter if using a blade holder)
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Again, please note this unit is an empty B Grade Flashgun w/no glass eye, red button, or bulb assembly. Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time approx. 1  week

    • Machine Finish Balance Pipe
    • Machine Finish mid-Band
    • Machine Finish Activation Box
    • Machine Finish Sink Knob
    • Brass Neck w/painted Brass & Copper paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug

    *New-Old stock emitters were located, and do have mild blemishes (nicks, dings, etc.) So while the overall hilt is in excellent condition, it will still NOT be offered as flawless. Some imperfections may still be present throughout.

    Lead time approx. 2-3 weeks..

    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

    • Hollow CNC Precision Machined MPP Tube
    • Iron Construction
    • Polished & Chrome Plated
    • Detailed Port Lettering

    *While this chrome barrel has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    Lead time: 1-2 weeks

  • 1" Blade Plug
    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center

    Lead time approx.: 1-2 weeks

  • Out of stock
    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Steel & Brass.
    • This is a great collectible for both WW1 collectors and sci-fi fans.
    • Breaks down in to individual parts
    • Machine finish
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    Lead time approx. 2-3 weeks

    • Replicated from an original No.3 MK1 Rifle Grenade.
    • Machined to exact measurements from Iron & Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Can be broken down as seen in last pic.
    • Weathered finish w/RED Top Ring.
    • NEW!!! Wind-vane w/Ring LETTERING included (new pics soon)

    ** Weathered & detailed by hand. Final product may vary slightly from images.

    Lead time approx. 2-3 weeks

  • Buried Hope – Weathered: WAVE #6

    $299.99
    • Steel Weathered Mk1 Balance Pipe
    • Brass Neck (Copper & Brass coated)
    • Anodized Aluminum Grenade & Booster
    • Aluminum mid-Band
    • Aluminum Activation Box
    • Aluminum Sink Knob
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #6

    Lead time approx.: 2-3 weeks

    • Replica Micro Precision Prod. name plate
    • Vintage Finish (may have small blemishes - see pics)

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish.
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • NO LOGO on band
    • Bright satin finish
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1930's Graflex Flashgun Clamp
    • Steel construction
    • GRAFLEX logo on band

    Lead time 1 week

    • Drilled to match V3 version
    • Replicated from an original 1930's Graflex Clamp.
    • Made to exact measurements.
    • GRAFLEX logo on band.
    • Bright satin finish
    *While this clamp has a nice clean finish, it is NOT offered as flawless. V3 holes were drilled post-clamp production, so some imperfections may be present.

    Lead time approx.: 1-2 weeks

    • NEW!!! 30 degrees Poly-carbonate Grips w/adhesive back
    • for ANH Graflex or MPP
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

  •  

    • NEW!!! Pre-Notched Poly-carbonate Grips w/adhesive back
    • 92mm in length
    • 3M double-stick tape

    Lead time: 1-2 weeks

    • This 3-Cell Bottom comes with grips & d-ring attached
    • Correct Angled Grips, D-Ring w/Double-rivet D-ring & Bubbles
    • "Folmer New York" stamped on 3-cell bottom
    • Also includes 7-bubble strip

    Lead time : 1-2 weeks

    • Replicated from an original Graflex 3-Cell battery holder.
    • "Folmer New York" stamped on 3-cell bottom

    Lead time approx.: 1-2 weeks

    *While this battery can has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.