• One (1) Sidebar w/RAF code
    • Replicated from an Original Graflex Clamp Sidebar
    • Made to exact measurements
    • Threaded same as a Vintage
    • Includes RAF code: 114A/63
    • This is a great collectible for both Camera Collectors and sci-fi fans.
    *While this sidebar has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • A Detonator: Weathered

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
  • Introducing our newest flashgun...the TELEGRAPH working flash!!! Not only is this a working flashgun it is the world's first and only TELEGRAPH flashgun in production capable of working as a real flash on a Vintage Graflex camera! Flashgun includes the following:

      • 1 Chrome plated Brass Top shell w/working Bulb Assembly
      • 1 Working Bulb Clamp (bunny ears)
      • 1 Working Spring-lever Red button
      • 1 Working FOLMER Eye for focusing
      • 1 Working Clamp w/FOLMER Lever
      • 1 3-Cell Battery Can w/spring (batteries not included)
    NOTE: Our TELEGRAPH Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a Vintage. **While these units have a nice clean finish, it is NOT offered as flawless. Some imperfections may be present. Any imperfections will only add to the character & authenticity of the unit. 

    Please order separately from In Stock items.

    Pre-order pushed to late-January.

    NOTE: late January is only the estimate for project completion. This does not include possible delays, packaging & shipping. Updates will be available via my FB page.

    UPDATE Feb. 05, 2024: So the project is coming along and nearly complete. We're up against the CNY, so that will add a coupe weeks delay bringing the project completion near the end of this month. Updates can be found on my FB page HERE.

  • A Thermal Detonator: Clean

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated / Clean finish
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)

    Lead time: 1-2 weeks

    **While this chrome version will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present. More info @ bottom of page.

    • Replicated from an original 1970's Starlite Cube Section
    • ABS Mold Injection
    • Pre-drilled for 3/4" d-ring (included)
    • Should fit most Vintage Starlite sink knobs

    Lead time: 1-2 weeks

  • Out of stock

    ANM2 Booster – Black Oxide

    $65.00
    • Replicated from an original Browning ANM2 machine gun booster
    • Black Oxide Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Machine Finish
    • Steel construction

    Out of Stock until Fall of 2020

  • Out of stock
    • Replicated from an original Browning ANM2 machine gun booster
    • Weathered Finish
    • Steel construction

    Out of Stock until Fall of 2020

    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

    • Hollow CNC Precision Machined MPP Tube
    • Gen.2 - Iron Construction
    • Polished & Chrome Plated
    • Detailed Port Lettering

    *While this chrome barrel has a nice chrome finish, it is NOT offered as flawless. Some imperfections may still be present. More info @ bottom of page.

    Lead  Time approx. 1-2 weeks

  • 1" Blade Plug
    • Will fit Balance V4 or any other 1" diameter blade socket
    • Aluminum construction

    Lead time approx.: 1-2 weeks