GREEBLIES

//GREEBLIES
  • 1" Blade Plug
    • Will fit Mk1 or any other 1" diameter blade socket
    • Shine-through bore in center

    Lead time approx.: 1-2 weeks

    • Replicated from an original Graflex Red Button
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans
    • Working button
    *While this button has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • Knurling sanded down to expose brass
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

  • Graflex Folmer Eye

    $28.00
    • Replicated from an original Graflex Folmer Eye
    • Made to exact measurements
    • Stainless Steel
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

    • 1 Pair/Set Transistors & Washers w/ME Logo & Print
    • NEW! Stainless Steel
    • M3.5 threading
    *Print is crisp & clear, but is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original Graflex Glass Eye
    • Made to exact measurements
    • This is a great collectible for both Camera Collectors and sci-fi fans

    Lead time approx.: 1-2 weeks

  • V2 Mystery Chunk
    • One (1) piece
    • Accurate top knurl
    • Steel construction
    • 8-32 1/4" threading

    Lead time approx. 1-2 weeks

  • V2 Lever

    $29.99
    • Steel construction w/chrome plating
    • Includes 5-40 tapped box & square washer
    • Same threading as vintage levers
    *While this lever has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time: 1 week

  • MPP End-cap features:

    • Short Knurl
    • Chrome Finish
    • Black End-plug
    * Threaded to fit real MPP. - So far these do fit Heilands & King Sols **While this end-cap has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time 1-2 weeks

    • Replica Micro Precision Prod. name plate
    • Vintage Finish (may have small blemishes - see pics)

    Lead time approx.: 1-2 weeks

  • V2 Blade Plug
    • Aluminum construction
    • Will fit V2 or any other 1" diameter blade socket
    • Shine-through bore in center
    • Includes Steel Pin w/4-40 set-screw
    • One (1) Sidebar w/RAF code
    • Replicated from an Original Graflex Clamp Sidebar
    • Made to exact measurements
    • Threaded same as a Vintage
    • Includes RAF code: 114A/63
    • This is a great collectible for both Camera Collectors and sci-fi fans.
    *While this sidebar has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Fully Operational Button.
    • Replicated from an original Folmer thin-knurl Red Button.
    • Brass construction w/chrome finish.
    • Threaded same as Vintage Counterpart.
    • Made to exact measurements.
    • This is a great collectible for both Camera Collectors and sci-fi fans.
    *While this button has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1970's Starlite Plug & Ring
    • ABS Mold Injection
    • Should fit most Vintage Starlite sink knobs

    *May require small shim for our older aluminum replicas

    Lead time: 1-2 weeks

  • V2 Thumbscrew
    • Aluminum construction
    • 8-32 threading

    Lead time 1-2 weeks

  • 1" Blade Plug
    • Will fit Balance V4 or any other 1" diameter blade socket
    • Aluminum construction

    Lead time approx.: 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

  • Folmer S.S. Lever

    $26.00$29.99
    • S.S. (Stainless Steel) construction
    • Black Oxide Pin
    • Threaded same as a Vintage lever
    • One (1) Lever
    • Optional S.S. Square Washer

    Lead time approx.: 1-2 weeks

    • Lettering replicated from an original No.3 MK1 Windvane Ring.
    • Machined to exact measurements from Brass.
    • This is a great collectable for both WW1 collectors and sci-fi fans.
    • Check bottom of page for fitting solutions.
    * TIPS for proper fit @ bottom of page. ** Final product may differ slightly from image as these are hand-weathered. *** The goal was to produce lettering that appeared faded/worn away (i.e. shallow). However, this proved to be difficult and did result in some areas deeper than others, but all engraving is present and clear.

    Lead time approx. 1-2 weeks

  • Gen.1 & 2 Bulb Release
    • Replica Micro Precision Prod. Bulb Release
    • 2-piece Release Knob w/press fit post
    • Working Button w/Spring

    Lead time approx.: 1-2 weeks

    • Replicated from an original 1970's Starlite Plug & Ring
    • ABS Mold Injection
    • Should fit most Vintage Starlite sink knobs

    *May require small shim for our older aluminum replicas

    Lead time: 1-2 weeks

  • Micro Precision Prod. Bar & Lever Set
    • Replicated from genuine MPP specs
    • Straight Edge Aluminum Bars (machine finish)
    • Chrome plated Lever & Washer
    *While this bar & lever set has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks

  • Gen.2 - Non-Working Bulb Assembly
    • Replicated from a Genuine MPP Flashgun outer specs
    • Includes all port contacts
    • Includes circular inner spring & bulb contact plate (no spring action)
    • Includes two (2) mounting screws
    While Created for our replica MPP these MAY fit other replicas w/some modification if any. Please let us know how these fit with Genuine King Sols or Heilands.

    Lead time approx.: 1-2 weeks

  • Working Bulb Clamp (aka: Bunny Ears)
    • Steel chrome plated construction
    • Functional Bulb Clamp
    • Includes threaded sleeve & smooth-head screw
    *While this clamp has a nice clean finish, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx.: 1-2 weeks