HILTS

/HILTS
  • This is an absolutely Beautiful, but somewhat imperfect Flashgun Replica. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge around threading for glass eye & red button (eye & button NOT included)
    • Shallow (but completely visible) lines on Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Threading for red button & glass eye was bored at a slight angle. (This however, will not matter if using a blade holder)
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Again, please note this unit is an empty B Grade Flashgun w/no glass eye, red button, or bulb assembly. Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time approx. 1  week

  • V2 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • V1 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • MPP w/BLACK bars on clamp, converted with Grips & D-Ring.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/BLACK bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail. V2 Board (not included) can be purchased directly from Slothfurnace HERE

    Lead time: 2-3 weeks

  • MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/silver bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips, D-Ring & Bubble Strip
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead time: 2-3 weeks

  • Out of stock

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Flashguns nearly complete, but ETA of Sept. will not be hit. No ETA yet available.

    Lead-time currently 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

  • Out of stock

    z MJV2 – FX Ready : Empty Hilt

    $275.00
    • Anodized & Machine Finish
    • 1" slip-fit emitter shaft
    • LED Momentary Switch

    Lead time : 2-3 weeks

    • Machine Finish Balance Pipe
    • Machine Finish mid-Band
    • Machine Finish Activation Box
    • Machine Finish Sink Knob
    • Brass Neck w/painted Brass & Copper paint
    • Anodized Grenade & Booster
    • Two (2) Pommel Caps: Static & Sound Vents
    • Blade Plug

    *New-Old stock emitters were located, but do have mild blemishes (nicks, dings, etc.) So while the hilt is in overall excellent condition, it is NOT offered as flawless. Some imperfections may still be present.

    Lead time approx. 2-3 weeks.

  • Detonator: Weathered

    $289.99
    Thermal Detonator - Fully assembled
    • Die-cast Zinc
    • Heavy @ approx. 9 0z.
    • Chrome plated
    • Functional Sound & Lights
    • 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
    *CLEAN version can be found HERE

    Lead time: 1-2 weeks

    PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.

     
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks

  • Buried Hope – Weathered: WAVE #6

    $299.99
    • Steel Weathered Mk1 Balance Pipe
    • Brass Neck (Copper & Brass coated)
    • Anodized Aluminum Grenade & Booster
    • Aluminum mid-Band
    • Aluminum Activation Box
    • Aluminum Sink Knob
    Blade Plug (not included) available: HERE *All hilts are weathered by hand, and as such, final product may vary slightly from images shown.

    WAVE #6

    Lead time approx.: 2-3 weeks