Lead Time: approx. 2-3 weeks
-
Every single component in this Static Kit was created with actual in-hand Authentic Vintage parts as reference. No detail was overlooked. No compromises were made. Owning this kit is the closest you can get to screen accurate! Hilt can be broken down into individual pieces which are true replicas of their Vintage counterparts. Accurate Chrome Sink Knob now standard!! Please choose one of the options below (random plug/ring will be sent if no selection is made): Hot/Red version: HERE Cold/Blue version: HERE -
Out of stock
Vintage Real Parts Obi-Wan Hilt includes:- Vintage Real: No.3 Mk1 British Rifle Grenade (Inert)
- Vintage Real: Graflex Clamp
- Vintage Real: Exactra Calculator Bubble Strip
- Vintage Real: Marconi Elliot Transistors
- Vintage Real: Aircraft Steel Washers
- Vintage Real: Armitage Shanks Cold Tap w/Black Ring (Replica Blue Ring also included)
- Vintage Real: D-Ring from Bell & Howell Camera Case
- Weathered Replica: Rolls Royce Derwent Balance Pipe
- Weathered Replica: Browning ANM2 Machine Gun Booster
Will ship within 48hrs of ordering, not including weekends or holidays
-
Buried Hope - FX Ready Empty Hilt- Steel Weathered Mk1 Balance Pipe
- Brass & Copper chemically Weathered Neck
- Anodized Aluminum Grenade & Booster
- I.D. (inner diameter) is minimum of 25mm
- 1″ slip-fit emitter shaft
- Includes both a Static & FX Cap
- More info @ bottom of page
WAVE #7
Lead time approx.: 2-3 weeks
-
- Aluminum LED Housing & Heat-sink
- M3 Blade retention screw (uses 1.5mm hex driver)
- Emitter Plug
- Copper Neck & Box details (clear-coat applied)
- Machine & Anodized finish
- Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
- 1" slip-fit emitter shaft
- Two (2) Pommel Caps: Static & Vented
- Weathered Finish
Lead time: 2-3 weeks
-
MPP w/BLACK bars on clamp, converted with Grips & D-Ring.
MPP replica includes:
- Chrome tube/body
- Clamp w/BLACK bars
- Bulb release detail
- Accurate end-cap
- Newly re-designed Grips
- "Battle Worn": Minor nicks, dings, blemishes
Lead Time approx. 2-3 weeks
-
New!!! STEEL V2 STENCILED HILT FX Ready - Empty hilt. Includes all the following:- Slothfurnace V2 Card
- Working Clamp w/Logo
- V2 Lever
- Thumbscrew replicated from Vintage
- Mystery Chunk Replicated from Vintage
- V2 Blade Plug
- more details @ bottom of page
Shipping approx. Sept. 30th 2023
Next Pre-Order Oct. 1, 2023
-
Working Gen.2 Flashgun replica includes:- Top & Bottom Shell
- Working Clamp w/Logo
- Accurate Slothfurnace OTIS card
- Accurate Kobold
- Two (2) Gen. 2 red buttons
- NEW accurate grips
- NEW pan-head (Exactra sized) Phillips screws
- NEW 0.5" chrome tape on clamp
- NEW removal of Beer Tab
- Cave stamping alignment
- “Battle Worn”: random nicks, dings, blemishes
Lead-time approx. 2-3 weeks
-
Thermal Detonator - Fully assembled- Die-cast Zinc
- Heavy @ approx. 9 0z.
- Chrome plated
- Functional Sound & Lights
- 1.5 Volt ONLY - Two (2) LR1, N, or E90 (not included)
Lead time: 1-2 weeks
PLEASE NOTE: Weathered Pattern is a combination of several different paints. Do NOT clean with chemicals as this may damage or thin the weathering. Applying a clear coat (e.g. Rustoleum) would help preserve the finish.
-
New!!! STEEL V2 Weathered Kit!!! New FX Ready - Empty Hilt includes all the following extras needed for a complete display hilt:- New!!! V2 Slothfurnace Card
- New!!! Thumbscrew based on Vintage
- New!!! Mystery chunk based on Vintage
- Clamp w/V2 Lever
- V2 Blade Plug
- more details @ bottom of page
Lead time approx. 2-3 weeks
-
New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:- Slothfurnace V2 Card
- V2 Lever
- Working Clamp w/Logo
- Thumbscrew based on Vintage
- Mystery Chunk based on Vintage
- V2 Blade Plug
- more details @ bottom of page
Lead time approx. 2-3 weeks
-
- Aluminum LED Housing & Heat-sink
- M3 Blade retention screw (uses 1.5mm hex driver)
- Emitter Plug
- Copper Neck & Box details (clear-coat applied)
- Machine & Anodized finish
- Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
- 1" slip-fit emitter shaft
- Two (2) Pommel Caps: Static & Vented
Lead time: 2-3 weeks
-
MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.
MPP replica includes:
- Chrome tube/body
- Clamp w/silver bars
- Bulb release detail
- Accurate end-cap
- Newly re-designed Grips, D-Ring & Bubble Strip
- "Battle Worn": Minor nicks, dings, blemishes
Lead Time approx. 2-3 weeks