HILTS

/HILTS
  • V1 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • V2 Antigonee – FX Ready Empty Hilt

    $129.99
    • Aluminum Construction
    • 1" slip-fit emitter shaft
    • Anodized Pommel w/Sound Holes
    • Main Body I.D. : 32mm
    • Copper Heat-sink Included

    Lead time : 1-2 weeks

  • Out of stock

    Complete and functional Graflex Flashgun:

    This is an absolutely Beautiful, but somewhat imperfect Graflex Flashgun. It features most of the Gen.2 properties with some Imperfections, which include but are not limited to the following:

    • Oval shoulder bulge under glass eye & red button
    • Shallow (but completely visible) lines on Graflex Clamp (mostly under "G")
    • Clamp lettering very closely lined-up as it should be, but not quite 100%
    • Red button & glass eye do not sit perfectly flush. Threading in flash was bored at a slight angle.
    The above imperfections are all present in the unit photographed, and as you can see, they are quite minor imperfections. Unit remains a working flashgun and does include working bulb assembly & battery spring (batteries not included). Flashgun has been made using many of the same methods, tooling and stampings that were used on a Vintage, and as such, may vary slightly from unit to unit same as a vintage and may have tiny imperfections same as a vintage. Any imperfections will only add to the character & authenticity of the unit. 

    Lead time: 1-2 weeks

  • Out of stock

    z Flashgun 5: “Battle Worn” Eco

    $245.00

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Working Graflex Clamp
    • NEW!!! Now featuring Gen.2 Red Buttons!!! (new pic coming soon)
    • Gen.1 Revised Grips (straight edge)
    • Accurate Slothfurnace OTIS Card
    • Accurate Kobold D-Ring (new pic coming soon)
    • Pommel stamping will be random
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Tentatively restocking August 2022

  • MPP w/BLACK bars on clamp, converted with Grips & D-Ring.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/BLACK bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail. V2 Board (not included) can be purchased directly from Slothfurnace HERE

    Lead time: 2-3 weeks

  • MPP w/SILVER Sidebars converted with Grips, D-Ring & Clamp Card.

    MPP replica includes:

    • Chrome tube/body
    • Clamp w/silver bars
    • Bulb release detail
    • Accurate end-cap
    • Newly re-designed Grips, D-Ring & Bubble Strip
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead time: 2-3 weeks

  • Out of stock

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • No-Logo Clamp
    • NEW!!! Now w/Gen.2 Red Button!!!
    • Glass Eye w/exposed Brass on side
    • Standard (long) Grips & Clamp Card
    • NEW!!! Now featuring WannaWanga's TFA Kobold
    • "Battle Worn": Minor nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Tentatively restocking August 2022

  • Out of stock

    Flashgun 4: “Battle Worn” Pro

    $265.00

    Working Gen.2 Flashgun replica includes:

    • Top & Bottom Shell
    • Graflex Clamp w/Calc Bubbles
    • Gen. 2 Red Button
    • NEW Folmer Eye
    • NEW Double-rivet D-Ring
    • NEW Angled Grips
    • "Battle Worn": random nicks, dings, blemishes
    * Final product may vary slightly in finish & detail.

    Lead-time currently 2-3 weeks

  • Balance V4: FX READY EMPTY HILT

    $269.99
    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    *While this hilt will be clean & un-weathered, it is NOT offered as flawless. Tiny imperfections may still be present.

    Lead time: 2-3 weeks

  • Out of stock

    z MJV2 – FX Ready : Empty Hilt

    $275.00
    • Anodized & Machine Finish
    • 1" slip-fit emitter shaft
    • LED Momentary Switch

    Lead time : 2-3 weeks

  • Out of stock
    New!!! STEEL V2 Machine Finish Kit!!! New FX Ready - Includes all the following extras needed for a complete display:
    • Satin Clamp w/V2 Lever & Slothfurnace V2 Card
    • Thumbscrew
    • Mystery chunk
    • V2 Blade Plug
    • more details @ bottom of page

    Temporarily postponed. Will have more info soon.

    • Aluminum LED Housing & Heat-sink
    • M3 Blade retention screw (uses 1.5mm hex driver)
    • Emitter Plug
    • Copper Neck & Box details (clear-coat applied)
    • Machine & Anodized finish
    • Works w/1" thin-walled blade & LED w/hole in center of pad. e.g. tri-cree
    • 1" slip-fit emitter shaft
    • Two (2) Pommel Caps: Static & Vented
    • Weathered Finish
    *All sections are Weathered by hand, and as such, final product may vary slightly from images.

    Lead time: 2-3 weeks